Sharp QT-MP5W, Руководство по эксплуатации

Страница: 28 / 32

19
QT-MP5W
Tape Recording
Recording to a cassette tape (continued)
Recording from CD
Programmed track recording from CD
Note:
Cassette play and record buttons will automatically release when
the end of tape has been reached.
Enhancing your system
Headphone
Before plugging in or unplugging the headphones, make sure the
volume level is reduced.
Be sure your headphones have a 3.5 mm (1/8") diameter plug and
are between 16 ohms and 50 ohms impedance. The recommend-
ed impedance is 32 ohms.
When headphones are connected, the speakers are disconnected
automatically. Adjust the VOLUME control for desired volume.
1
Set the FUNCTION switch to CD.
2
Load a blank cassette into the cassette compartment with
the side to be recorded on facing up.
3
Press the RECORD button, the recording will begin.
4
When press the STOP/EJECT / button during record-
ing, display will appear, but CD still spinning.
5
To stop the CD spinning press the STOP button.
1
Select the memories track you want to record.
2
After memories the selected track, press the RECORD
button. The recording for memory track will begin until
end.
3
After recording is completed, disc will stop to rotate, but
tape still rotating.
4
Press the STOP/EJECT / button to stop recording.
TRACK