Sharp QT-MP5W, Руководство по эксплуатации

Страница: 15 / 32

6
QT-MP5W
Preparation for Use
Operation with AC power
Connect the AC power lead to the AC power input socket, then
connect the AC power lead plug to the wall socket.
Notes:
If the unit will not be used for a long period of time, remove the AC
power lead from the wall socket.
Connection of the AC power lead to the unit disconnects the
batteries.
Never use a power lead other than the one supplied. It may
cause an electric shock or fire.
Operation with batteries
Battery replacement:
Replace the batteries when they become weak and/or recording or
playback is impaired. This may occur even though radio broadcasts
are audible.
Notes:
Replace all old batteries with new ones at the same time.
Do not mix old and new batteries.
Remove the batteries if they are weak or if the unit will not be
used for long periods of time. This will prevent potential damage
due to battery leakage.
Batteries are not included.
Caution:
Do not use rechargeable batteries (nickel-cadmium battery, etc.).
To a wall socket
To AC INPUT
AC 110-127/220-240 V,
50/60 Hz
1 Disconnect the AC power lead, and remove the battery com-
partment cover.
2 Insert 8 “D”, size batteries (UM/SUM-1, R20, HP-2 or similar)
into the battery compartment.
Insert the batteries according to the direction indicated on the
rear panel.
When inserting or removing the batteries, push them towards
the battery terminals.
Installing the batteries incorrectly may cause the unit to
malfunction.
3 Replace the battery compartment cover.
4
3
2
5
7
8
6
1