<P=002>
COMPACT DISC OPERATION
POWER
(Function)
PLAY / PAUSE
TUNING
STOP
TUNING
REPEAT
BAND
CUE
PRESET
REVIEW
PRESET
2
3
4
TUNING
/
PRESET
/
PRESET
TUNING
BAND
■
CD playback
1
Set the function switch to CD.
2
Open the CD compartment.
3
Place a compact disc on the spindle, label side
up.
●
3" (8 cm) discs may be played without an adap-
tor.
4
Close the CD compartment.
Total number of
tracks
Total playing time
5
Press the PLAY/PAUSE (
0 6
) button to start
playback from track 1.
6
Press the VOLUME
W
button to increase the
volume and the VOLUME
X
button to decrease
the volume.
7
Press the X-BASS button to emphasize the bass
region of the frequency spectrum.
The "X-BASS" indicator will light up.
Press the X-BASS button again to cancel the
extra bass mode.
The "X-BASS" indicator will go out.
To interrupt playback:
Press the PLAY/PAUSE (
0 6
) button during
playback.
Press the PLAY/PAUSE (
0 6
) button again to
resume playback.
To stop playback:
Press the STOP (
■
) button.
Precautions:
●
When "no dISC" or track number is displayed,
the power is connected.
If you will not be using the CD player, set the
POWER switch to OFF.
●
Do not open the CD compartment while the
disc is rotating.
●
If the disc is damaged, dirty, or loaded upside
down, "Er" or "no dISC" will appear in the
display.
Clean, replace, or reload the disc properly.
●
Keep foreign objects out of the CD compart-
ment.
●
Subjecting the unit to shock or vibration may
cause mistracking.
●
Keep the CD compartment closed except
when loading discs.
●
Playing certain compact discs at a high
volume may cause mistracking. In this case,
listen at a lower volume.
●
The temperature range for playing compact
discs is recommended to be 41˚F (5˚C) - 95˚F
(35˚C).
●
If TV or radio interference occurs during CD
operation, move the unit away from the TV or
radio.
QT-CD250(SEC) TINSE0040SJZZ
6
