<P=005>
RADIO OPERATION
■
Tuning
1
Set the function switch to TUNER.
2
Press the REPEAT/BAND (
R
) button to select
the desired frequency band. (FM ST, FM or AM)
●
To receive an FM stereo transmission, press the
REPEAT/BAND (
R
) button so that the "ST" in-
dicator on the display lights up.
●
The "
j
" indicator lights up when an FM broad-
cast is in stereo.
3
Press the TUNING (
X
or
W
) button to tune into
the desired station.
FM STEREO
FM MONO
AM
POWER
(Function)
TUNER
MEMORY
PLAY / PAUSE
TUNING
STOP
TUNING
REPEAT
BAND
CUE
PRESET
REVIEW
PRESET
TUNING
/
PRESET
/
PRESET
TUNING
TUNER
MEMORY
CLEAR
BAND
Manual tuning:
Press the TUNING (
X
or
W
) button as many times
as required to adjust the frequency shown on the
display to the frequency of the desired station.
Auto tuning:
When the TUNING (
X
or
W
) button is pressed for
more than 0.5 seconds, scanning will start automat-
ically and the tuner will stop at the first receivable
broadcast station.
Notes:
●
When radio interference occurs during auto scan
tuning, auto scan tuning may stop automatically
at that point.
●
If a weak station signal is found during auto scan
tuning, the station will be skipped.
●
To stop the auto tuning, press the TUNING (
X
or
W
) button again.
●
If the FM reception is poor, press the REPEAT/
BAND (
R
) button so that the "ST" indicator goes
out.
Although the reception changes to monaural, the
sound becomes clearer.
Antenna adjustment:
FM
AM
After use:
Set the POWER switch to OFF.
QT-CD250(SEC) TINSE0040SJZZ
9
