![Sharp QT-CD180H Скачать руководство пользователя страница 25](http://html.mh-extra.com/html/sharp/qt-cd180h/qt-cd180h_operation-manual_373084025.webp)
E-5
1
Set the FUNCTION switch to TAPE.
2
Open the cassette door by pushing the STOP/EJECT
■
7
7
7
7
7
button.
3
Load a cassette into the cassette compartment with the side to
be played facing toward you.
4
Press the PLAY
1
1
1
1
1
button.
5
To advance the tape, press the STOP/EJECT
■
7
7
7
7
7
button, then
press the F FWD
3
3
3
3
3
button. To rewind, press the STOP/EJECT
■
7
7
7
7
7
button, then press the REWIND
2
button.
To interrupt playback:
Press the PAUSE
6
6
6
6
6
button during playback.
Press the PAUSE
6
6
6
6
6
button again to resume playback.
To stop playback:
Press the STOP/EJECT
■
7
button.
Precautions:
●
Be sure not to press the PLAY
1
1
1
1
1
and REWIND
2
buttons simultaneously, or
the tape will become damaged.
●
Before changing from one tape operation to another, press the STOP/EJECT
■
7
7
7
7
7
button.
●
Do not press the PAUSE
6
button whilst the fast forward or rewind operations are
in progress. The F FWD
3
or REWIND
2
button will not be released when the
tape end is reached. Once this occurs, press the STOP/EJECT
■
7
7
7
7
7
button.
Listening to a Cassette Tape
Tab for side B (2) Tab for side A (1)
Side A (1)
■
Cassette tape
●
For playback, use normal or low-noise tape for the best sound. (Metal or
CrO
2
tape is not recommended.) For recording, use only normal tape.
●
Do not use C-120 tapes, or poor-quality tapes, as they may cause mal-
functions.
●
Before loading a tape into the cassette compartment, tighten the slack
with a pen or pencil.
●
Cassettes have removable tabs which prevent accidental recording or
erasing from taking place. Removing the tab will protect the correspond-
ing side from being erased. Cover the tab holes with adhesive tape to
erase or record again.
●
Before plugging in or unplugging the headphones, make sure the volume
level is reduced.
●
Be sure your headphones have a 3.5 mm (1/8") diameter plug and are
between 16 ohms and 50 ohms impedance. The recommended imped-
ance is 32 ohms.
●
When headphones are connected, the speakers are disconnected auto-
matically. Adjust the VOLUME control for desired volume.
Headphones
To the PHONES socket
Содержание QT-CD180H
Страница 28: ...B0012 TO TINSZ0084SJZZ SHARP CORPORATION 9906 ...