Sharp QT-CD180H, Руководство по эксплуатации

Страница: 23 / 28

E-3
Listening to a CD
MIN MAX
5
Press the PLAY/PAUSE
0 6 0 6 0 6 0 6 0 6
button to start playback from track 1.
6
Turn the VOLUME control to increase or decrease the volume.
7
Press the X-BASS button to emphasise the bass sound.
To interrupt playback:
Press the PLAY/PAUSE
0 6
button during playback.
Press the PLAY/PAUSE
0 6
button again to resume playback.
To stop playback:
Press the STOP
■
button.
To listen to the track being played again:
During playback, press the REVIEW/DOWN
5
button.
To move to the beginning of the next track:
During playback, press the CUE/UP
4
button.
Notes:
●
To skip a number of tracks at one time, press the REVIEW/DOWN
5
or CUE/UP
4
button repeatedly until the desired track number
is shown.
●
To start playing a desired track, press the REVIEW/DOWN
5
or
CUE/UP
4
button whilst in the stop mode to select the track num-
ber, and then press the PLAY/PAUSE
06
button.
1
Set the FUNCTION switch to CD.
2
Open the CD compartment.
3
Place a compact disc on the spindle, label side up.
8 cm (3") discs may be played without an adaptor.
4
Close the CD compartment.
Precautions:
●
When “Cd” or track number is displayed, the power is connected.
If you will not be using the CD player, set the FUNCTION switch to STAND-BY.
●
Do not open the CD compartment whilst the disc is rotating.
●
If the disc is damaged, dirty, or loaded upside down, the total number of
tracks will not appear.
Clean, replace, or reload the disc properly.
●
Keep foreign objects out of the CD compartment.
●
Subjecting the unit to shock or vibration may cause mistracking.
●
Keep the CD compartment closed except when loading discs.
● Playing certain compact discs at a high volume may cause mistracking.
In this case, listen at a lower volume.
●
If TV or radio interference occurs during CD operation, move the unit
away from the TV or radio.