24
Use the control buttons and keyboard to navigate within a text box:
•
Move character-by-character – Press the D-Pad or roll the trackball
left/right.
•
Jump to beginning/end of a word – Press ALT + D-Pad or trackball
left/right.
•
Jump to beginning/end of a line – Press MENU
+ trackball left/right.
•
Jump to beginning/end of the text box – Press MENU
+
/
.
Delete Text
•
Delete a character to the left of the cursor – Press DEL
•
Delete a character to the right of the cursor – Press SHIFT + DEL
•
Delete all the characters on one line – Press ALT +
Cut, Copy, Paste, Undo
To cut, copy, or paste text you have typed, do the following:
1.
Position your text cursor next to the text you want to cut or copy. (Use
the navigation methods listed above to position the text cursor.)
2.
Hold down the SHIFT key while pressing the D-Pad or trackball in a
direction. As you select text, it is shown highlighted. (To de-select all,
release the SHIFT key and roll the trackball.)
3.
Press MENU
and select Edit Text to open the Edit Text submenu, or
simply press and hold the trackball to open the Edit Text context menu.
Select the operation you want to perform on the selected text.
Note the standard shortcuts:
•
Cut
MENU
+ X
•
Copy
MENU
+ C
•
Select All
MENU
+ A
4.
Paste text that you have copied (or cut) into any text box in any
application. Position your cursor where you want to paste the text, then
use the Paste shortcut MENU
+ V. Note that the device clipboard only
stores one set of copied or cut text at a time.
5.
If you make a text edit and want to undo it, simply press
MENU
+ Z.
To redo an undo, press MENU
+ SHIFT + Z again.
Check Spelling
You can run spell check on any text field.
