Sharp PN-V600 Operation Скачать руководство пользователя страница 31

Страница: 31 / 61

You can return the settings to their factory-preset values and

restrict operations.

1. If using the remote control unit, press

SIZE

until “F”

is displayed in the upper left area of the screen, then
while “F” is being displayed, press

, and

in that order.

If using the monitor buttons, press

and

at the

same time until “F” is displayed in the upper left area

of the screen, then while “F” is being displayed, press

and at the same time.

OFF

UNLOCKED

ON1

LED
OFF

MONITOR

FUNCTION

1/1

ALL RESET

ADJUSTMENT LOCK

ADJUSTMENT LOCK TARGET

RS-232C
OSD DISPLAY
LED
TEMPERATURE ALERT
STATUS ALERT
POWER BUTTON

CONTROLLER INPUT

END…[MENU]

2. Select and set the items.

ALL RESET

Resets the settings to the factory default settings.
Press

, select ALL RESET, and then press

After initialization, turn the main power switch off and

then back on.

When the PN-ZB02 (optional) is attached, press

select the resetting method, and then press

ALL RESET1

....Resets all the settings to the factory

default settings.

ALL RESET2

....Returns all settings to the factory default

settings except for the following items:

LAN SETUP, RS-232C/LAN SELECT,

ID No. SET, BAUD RATE, NETWORK,

MAIL, SERVICE & SUPPORT, and

SNMP (See pages 24, 25, and pages 49

to 52.)

ADJUSTMENT LOCK

You can disable operations on the monitor and the

remote control unit that use buttons.

OFF

...

Enables operation.

ON 1

Disables all operations other than turning power

on/off, FUNCTION and REMOTE CONTROL

MODE.

ON 2

Only the FUNCTION and REMOTE CONTROL

MODE operations are enabled.

Disables all operations other than FUNCTION

and REMOTE CONTROL MODE (not even power

on/off).

ADJUSTMENT LOCK TARGET

Sets the target to prohibit operation of with

ADJUSTMENT LOCK.

REMOTE CONTROL

...Prohibits remote control operation

MONITOR BUTTONS

....Prohibits monitor button operation

BOTH

........................ Prohibits remote control and

monitor button operation

Initialization (Reset)/Functional Restriction Setting (FUNCTION)

RS-232C

(RS-232C/LAN when the PN-ZB02 (optional) is

attached)

Specifies whether to allow control via RS-232C or LAN

(see pages 32 and 45).

OSD DISPLAY

Shows/hides the menu, modes, and messages.

The FUNCTION and REMOTE CONTROL MODE

screens cannot be hidden.

ON 1

............. Shows all menus, modes, and messages.

ON 2

............. Hides messages automatically displayed

by the display. Shows messages during

operation.

OFF

.............. Hides all menus, modes and messages.

LED

Specifies whether to light the power LED.

OFF cannot be selected when STANDBY MODE is LOW

POWER.

TEMPERATURE ALERT

Selects the notification method for an abnormal

temperature.

OFF

..............

Do not notify about an abnormal

temperature.

OSD & LED

When an abnormal temperature is

detected, the power LED flashes in red

and green alternately and the screen

displays a message: TEMPERATURE.

LED

...............

When an abnormal temperature is

detected, the power LED flashes in red

and green alternately.

STATUS ALERT

Selects the notification method for a hardware error.

OFF

..............

Do not notify about the error.

OSD & LED

When a hardware error is detected, the

power LED flashes in red and the screen

displays a message: STATUS [xxxx].

LED

...............

When a hardware error is detected, the

power LED flashes in red.

POWER BUTTON

Normally, leave this setting as MONITOR.

When using an optional part, if instruction appears,

change the setting accordingly.

CONTROLLER INPUT

Normally, you do not need to change this setting.

When using an optional part, if instruction appears,

change the setting accordingly.

3. Press

to return to the normal screen.

TIPS

• When both abnormal temperature and hardware error are

detected, the hardware error notification overrides.

• If TEMPERATURE ALERT or STATUS ALERT is set to

OSD & LED, alert messages will appear even if the OSD

DISPLAY is set to ON 2 or OFF.

• If TEMPERATURE ALERT or STATUS ALERT is set to LED

or OSD & LED, the LED lights even if the LED function is

set to OFF.

Содержание PN-V600 Operation






























































Результаты поиска

Содержание PN-V600 Operation

Отзывы:

Похожие инструкции для PN-V600 Operation

Бренды по названию

Популярные бренды

Sharp PN-V600 Operation, Руководство по эксплуатации

Результаты поиска

Содержание PN-V600 Operation

Отзывы:

Похожие инструкции для PN-V600 Operation

Бренды по названию

Популярные бренды