Sharp PN-V600 Operation Скачать руководство пользователя страница 14

Страница: 14 / 61

■ Connection with RS-232 cable

If you connect the monitor in a daisy chain using RS-232

cable, using the monitor buttons on the primary (main unit),

settings are copied to the secondary (expansion unit) and

operation from the primary can perform operation for all

monitors. Setting each ID No. in the monitor is required.

1. Connect the monitors in order.

The first monitor will be set as primary (main unit) and the

second monitor and beyond will be secondaries (expansion

units).

Connect the RS-232C output terminal of the first monitor

(primary) and the RS-232C input terminal of the second

monitor (secondary) together using RS-232 cable (straight).

Connect in the same way to the third and subsequent monitors.

Up to 25 monitors can be connected. (Depending on the length

of the cable used and the surrounding environment.)

RS-232 straight cable

(commercially available)

First monitor: primary Second monitor: secondary

Third monitor: connects to secondary

RS-232C input terminal

RS-232C

input terminal

RS-232C

output terminal

RS-232C

output terminal

2. Set the ID No.

Perform operation with the rear side buttons on the primary

monitor. If you set AUTO ASSIGN ID No., located in the menu

of the monitor to ON, the ID No. will be automatically assigned

in order from the primary. (See page 24.)

(If you attach PN-ZR01 the control kit (optional), you can

perform operation of the monitors with the remote control unit.)

■ Connection with the control kit (optional)

If performing operation of the monitor with the remote control

unit, the PN-ZR01 control kit (optional) is required.

• Can perform operation of an arbitrary monitor or all

monitors with the remote control unit of the first monitor.

• Can perform operation of up to 25 monitors.

• Connect the monitors together in a daisy chain with RS-232

cable.

Attach the remote control sensor box as shown in the following

illustration.

* When attached to the left side, because the top and

bottom for the remote control sensor box will be reversed

(the connection cable will be on top), the right side is

recommended.

Caution

• When attaching the remote control sensor box, turn the

main power switch OFF.

• Except for the remote control sensor box connection cable,

do not insert any other cable into the control kit terminal.

Also, do not connect any connection cables that have been

extended with commercially available cables.

For the monitor in

landscape orientation

For the monitor in

portrait orientation

1. Insert the anti-rotation protrusion of the mounting

bracket into the anti-rotation hole of the monitor.

2. Secure the stand angling hole of the monitor with the

mounting screw.

3. Adjust the angle of the remote control sensor box, and

secure it with the fixing screw, so that it may accurately

receive signals from the remote control unit.

Anti-rotation protrusion

Angle

adjustment

Anti-rotation hole

Mounting bracket

Mounting screw (short)

Fixing screw

Remote control

sensor box

Stand angling hole

4. Insert the remote control sensor box connection cable

into the control kit terminal.

Connection cable

Control kit terminal

Remote control

sensor box

TIPS

• When you connect the remote control sensor box, the

brightness sensor can be used.

The screen brightness will automatically change according

to lighting conditions and the surrounding brightness. (See

page 25.)

• Depending on where it has been placed or the surrounding

conditions, the remote control sensor box may be

affected by the brightness of the main unit screen and the

brightness sensor may respond.

• Do not install the remote control sensor box in extremely

bright or dark areas. The brightness sensor may not

function properly.

Brightness

sensor

Connecting Peripheral Equipment

Содержание PN-V600 Operation






























































Результаты поиска

Содержание PN-V600 Operation

Отзывы:

Похожие инструкции для PN-V600 Operation

Бренды по названию

Популярные бренды

Sharp PN-V600 Operation, Руководство по эксплуатации

Результаты поиска

Содержание PN-V600 Operation

Отзывы:

Похожие инструкции для PN-V600 Operation

Бренды по названию

Популярные бренды