Sharp PN-T321, Руководство по эксплуатации

Страница: 13 / 33

11
E
Binding Cables
The cables connected to the terminals on the rear of the
monitor can be fastened with the cable clamp.
Attach the cable clamp to the back of the monitor, and fasten
the cables.
Setting the USB flash drive cover
1. Insert the USB flash drive into the USB port.
USB port
2. Attach the USB flash drive cover and secure with the
provided screw.
Insert the claw (1) into the monitor, and while pressing in
the direction of (2), insert the claw (3) into the monitor.
(2)
(3)
(3)
(1)
Screw
(black)
USB flash drive cover
Cable clamp
Cable
TIPS
• If the USB flash drive will be attached, use a USB flash drive with dimensions no greater than 3-1/8 inch (80 mm) (L) × 15/16
inch (25 mm) (W) × 7/16 inch (12 mm) (H).
• To remove the USB flash drive cover, reverse the procedure. Using excessive force may break the claws. Exercise caution.
Caution
• Do not touch any screws other than the black screw.