Sharp PN-L702B Скачать руководство пользователя страница 57 | Manualshive

Страница: 57 / 58

Sharp PN-L702B Скачать руководство пользователя страница 57

57

E

•  When installing, removing or moving the monitor, ensure that this is carried out by at least 4 people.
•  Be sure to use a wall-mount bracket designed or designated for mounting the monitor.
•  This monitor is designed to be installed on a concrete wall or pillar. Reinforced work might be necessary for some materials

such as plaster / thin plastic board / wood before starting installation.
This monitor and bracket must be installed on a wall which can endure at least 4 times or more the weight of the monitor.
Install by the most suitable method for the material and the structure.

• To attach a VESA-compliant mounting bracket, use M6 screws that are 5/16 inch (8 mm) to 3/8 inch (10 mm) longer than the

thickness of the mounting bracket.

• After mounting, please carefully ensure the monitor is secure, and not able to come loose from the wall or mount.
• Do not use any screw holes other than VESA holes for installation.

Mounting Precautions

(For SHARP dealers and service engineers)

n

Attaching the Tray

1. Remove the cover from the back of the monitor.

2. Secure the tray mounting fitting.

Secure using the screw removed in step 1 and 2 M5 tray

mounting screws (supplied).

Screw removed in step 1

Cover (supplied)

Bracket (supplied)

M5 tray mounting screws

(supplied)

Tray mounting

fitting

(3)

(2)

(1)

3. Secure the tray.

Insert the tray into the tray mounting fitting and secure with

2 M4 tray mounting screws (supplied).

Tray

(supplied)

M4 tray mounting screws

(supplied)

«
...
55
56
57
58
»

Содержание PN-L702B



























































Отзывы:

Нет отзывов