Sharp PN-L603WA страница 55 Скачать руководство пользователя

Страница: 55 / 70

5. Click on “LAN SETUP” under NETWORK.

6. Specify the “DHCP CLIENT”, “IP ADDRESS”,etc.

DHCP CLIENT

If your LAN has a DHCP server and you wish to obtain an

address automatically, change this setting to “ON”.

To set the address manually, set this to “OFF”.

IP ADDRESS

If the DHCP CLIENT is set to “OFF”, specify an IP address.

SUBNET MASK

If the DHCP CLIENT is set to “OFF”, specify the subnet mask.

DEFAULT GATEWAY

If the DHCP CLIENT is set to “OFF”, specify the default gateway.

If you are not using a default gateway, specify “0.0.0.0”.

7. When the setting is changed, click [Apply].

8. Check the message and click [OK].

9. Exit the web browser.

10. Restore the computer’s IP address jotted in Step 6, “(2)

Specifying the computer’s IP address”.

11.

Connect the monitor and the computer to the LAN.

TIPS

• Wait 10 seconds after clicking [OK] before proceeding.

• When operating using the remote control unit or similar,

click [Refresh].

Controlling with a computer

TIPS

• For security, set a USER NAME and PASSWORD.

■ Basic operation

You use the web browser on a computer on the LAN to control

the monitor.

1. Launch the web browser on the computer.

In the “Address” box, type “http://” followed by your monitor’s

IP address followed by “/”, then press the Enter key.

You can confirm the IP address with the DISPLAY function.

When prompted to enter a USER NAME and PASSWORD,

type the user name and password that you specified in the

SECURITY settings (see page 57), and click [OK].

3. You can check, control, and change the monitor’s status

and settings by clicking the menu items on the left side of

the screen.

• If you see an [Apply] button next to a setting, click it after

you change that setting.

TIPS

• See pages 56 to 60 for details on each setting.

• If you click [Refresh] before the screen finishes updating

the current display, the “Server Busy Error” will appear.

Wait for a moment before operating your monitor again.

• You cannot operate the monitor while it is warming up.
• If “DHCP CLIENT” is set to “ON”, press

DISPLAY

on the

remote control unit two times and then check the monitor’s

IP address.

Controlling the Monitor with a computer (LAN)

Содержание PN-L603WA







































































Результаты поиска

Содержание PN-L603WA

Отзывы:

Похожие инструкции для PN-L603WA

Бренды по названию

Популярные бренды

Sharp PN-L603WA, Руководство по эксплуатации

Результаты поиска

Содержание PN-L603WA

Отзывы:

Похожие инструкции для PN-L603WA

Бренды по названию

Популярные бренды