Sharp PN-L603WA страница 26 Скачать руководство пользователя

Страница: 26 / 70

(3) Touch action setting

Touch to disable touch action.

Touch again to enable touch action.

TIPS

• When the input mode is changed, the disable touch

action setting is canceled.

• When TOUCH OUTPUT INVALID ICON is set to ON and

touch action is disabled, the TOUCH OUTPUT INVALID

icon appears in the monitor.

• You can touch the TOUCH OUTPUT INVALID icon in the

monitor to enable touch action.

• The position of the TOUCH OUTPUT INVALID icon can

be changed. (See page 35.)

• The TOUCH OUTPUT INVALID icon appears even when

a USB cable is not connected.

(4) Exit touch menu

Closes the touch menu.

TIPS

• The touch menu can also be used with the remote control

unit.

(1) Hold down

DISPLAY

at least 5 seconds.

The touch menu appears.

(2) Select the setting item with

(3) Set with

, and press

ENTER

- The setting is entered.
- Press

RETURN

to exit the touch menu.

Using the remote control unit

3
4

1. INPUT (Input mode selection)

The men

u is displayed. Press

to select the input

mode, and press

ENTER

to enter.

* For the input modes that can be selected, see “Using the

touch menu” (see page 25.).

2. MUTE

Turns off the volume temporarily.

Press the MUTE button again to turn the sound back to the

previous level.

3. MENU

Displays and turns off the menu screen. (See page 29.)

4. VOL +/- (Volume adjustment)

Pressing

displays the VOLUME menu when the

menu screen is not displayed.

Press

to adjust the volume.

* If you do not press any buttons for about 4 seconds, the

VOLUME menu automatically disappears.

* You can also change the setting by touch action.

Basic Operation

Содержание PN-L603WA







































































Результаты поиска

Содержание PN-L603WA

Отзывы:

Похожие инструкции для PN-L603WA

Бренды по названию

Популярные бренды

Sharp PN-L603WA, Руководство по эксплуатации

Результаты поиска

Содержание PN-L603WA

Отзывы:

Похожие инструкции для PN-L603WA

Бренды по названию

Популярные бренды