Sharp PN-L603W Скачать руководство пользователя страница 60

Страница: 60 / 70

Controlling the Monitor with a computer (LAN)

■ SNMP

You can configure settings related to SNMP.

SNMP SETTING

Set whether to enable or disable SNMP.

VERSION

Set the version of the SNMP to be supported.

COMMUNITY NAME 1 to 3

Set the name of the community required for the access.

USER 1 to 3

Set the user name, password, authentication method and

other options required for access.

TRAP SETTING

Set whether to enable or disable the trap function.

When this function is enabled, a trap will be sent when the

monitor is turned on.

A test transmission of a trap can be performed in “Test”.

TRAP SETTING OF AUTHENTICATION ERROR

Set whether the trap function sends a notification when

authentication fails.

TRAP ADDRESS & PORT

Set the destination address and port number of the

notification sent by the trap function.

Caution

• After you set SNMP, click [Switch the main power of

monitor off and on now.] or turn off the monitor and then

turn it on again with the main power switch.

When the monitor restarts, wait about 30 seconds and then

start the next operation.

• If the IP address is changed while the SNMP function is

operational, turn off the monitor and then turn it on again

with the main power switch.

TIPS

• Depending on the SNMP settings, a short delay may occur

before the SNMP is usable. (About 5 minutes)

• Up to 16 alphanumeric letters and symbols can be used for

the community name, user name and password.

■ SERVICE & SUPPORT

(URL INFORMATION)

You can display a specific URL in the URL INFORMATION

field on the INFORMATION screen when an error occurs in

the monitor. (See page 56.)

URL INFORMATION

Enter the URL to display on the INFORMATION screen when

an error occurs on the monitor.

Up to 64 alphanumeric characters or symbols can be used.

CONDITION

Specify the condition to display the URL.

CONFIRMATION

The home page of the specified URL is displayed.

You can check whether the URL you entered is correct.

TIPS

• It is also possible to specify the message text, such as the

name of a contact or a telephone number, to be displayed

instead of the linked URL.

Содержание PN-L603W







































































Результаты поиска

Содержание PN-L603W

Отзывы:

Похожие инструкции для PN-L603W

Бренды по названию

Популярные бренды

Sharp PN-L603W, Руководство по эксплуатации

Результаты поиска

Содержание PN-L603W

Отзывы:

Похожие инструкции для PN-L603W

Бренды по названию

Популярные бренды