Sharp PN-E602 страница 16 Скачать руководство пользователя

Страница: 16 / 57

Caution

• Turn on the monitor first before turning on the PC or

playback device.

Turning on the main power

Main power switch

Caution

• The main power must be turned on/off with the main power

switch. Do not connect/disconnect the power cord or turn

the breaker on/off while the main power switch is on.

• When switching the main power switch or the POWER

button off and back on, always wait for at least 5 seconds.

• For a complete electrical disconnection, pull out the main

plug.

Turning Power On/Off

Turning power on/off

Press the POWER button or POWER switch to turn the power

ON/OFF.

Power LED

Status

Status of the monitor

Green lit

Power on

Orange lit

Power off (Standby mode)

Green flashing

Input signal waiting mode

Caution

• When switching the main power switch or the POWER

button off and back on, always wait for at least 5 seconds.

A short interval may result in a malfunction.

TIPS

• When the main power switch is off, the monitor cannot be

turned on.

• If the monitor is in the input signal standby mode and you

press the POWER button on the remote control unit, the

monitor enters standby mode.

• Setting the SCHEDULE flashes the power LED alternately

in red and orange in standby mode.

• To disable the logo screen from displaying when turning

the power ON, set LOGO SCREEN to OFF on the SETUP

menu. (See page 23.)

Содержание PN-E602


























































Результаты поиска

Содержание PN-E602

Отзывы:

Похожие инструкции для PN-E602

Бренды по названию

Популярные бренды

Sharp PN-E602, Руководство по эксплуатации

Результаты поиска

Содержание PN-E602

Отзывы:

Похожие инструкции для PN-E602

Бренды по названию

Популярные бренды