Sharp PN-70SC5 страница 18 Скачать руководство пользователя

Страница: 18 / 41

Caution

• When all connections are complete, turn on the power.

• Turn on the monitor first before turning on the computer or

playback device.

• When switching the main power switch or the POWER

button off and back on, always wait for at least 5 seconds.

A short interval may result in a malfunction.

Turning on the main power

When the main power is turned on, the power LED lights. Wait

until the screen is displayed.

Main power switch

Caution

• The main power must be turned on/off with the main power

switch. Do not connect/disconnect the power cord or turn

the breaker on/off while the main power switch is on.

• For a complete electrical disconnection, pull out the main

plug.

Turning Power On/Off

Turning power on/off

Press the remote control POWER button or the monitor

POWER button to turn the power ON/OFF.

You can also turn the power ON/OFF by pressing the

MONITOR ON button/MONITOR OFF button on the remote

control unit.

POWER

HDMI 1

D-SUB

INPUT

BL OFF

VOL ─

VOL + FREEZE

Power LED

Status

Status of the monitor

Blue lit

Power on

Orange lit

Power off (Standby mode)

TIPS

• When the main power switch is off, the monitor cannot be

turned on.

Operation mode

When the monitor is turned on for the first time after being

shipped from the factory, the operation mode setting screen

will be displayed. Set it to MODE1 or MODE2.

MODE1 ....OFF IF NO OPERATION is set to 4HR.. (These

settings can not be changed.)

If there is no operation for 4 hours or more, the

monitor automatically enters standby mode.

MODE2 ....Will perform standard operation.

OFF IF NO OPERATION is set to DISABLE. These

settings can be changed.

Even after being set, changes can be made using

OPERATION MODE, located in the menu of the monitor. (See

page 27.)

Содержание PN-70SC5










































Результаты поиска

Содержание PN-70SC5

Отзывы:

Похожие инструкции для PN-70SC5

Бренды по названию

Популярные бренды

Sharp PN-70SC5, Руководство по эксплуатации

Результаты поиска

Содержание PN-70SC5

Отзывы:

Похожие инструкции для PN-70SC5

Бренды по названию

Популярные бренды