Sharp PN-70SC5 Скачать руководство пользователя

Страница: 13 / 41

Connecting Peripheral Equipment

Caution

• Be sure to turn off the main power switch and disconnect

the plug from the power outlet before connecting/

disconnecting cables. Also, read the manual of the

equipment to be connected.

• Be careful not to confuse the input terminal with the output

terminal when connecting cables. Accidentally reversing

cables connected to the input and output terminals may

cause malfunctions and the other problems.

• Do not use any cable that has a damaged or deformed

terminal. Using such cables may cause malfunctions.

TIPS

•

When using the touch panel, connect the USB cable to the

computer. When the USB cable is connected, the touch

panel is enabled even when the main power switch is off.

• Images may not be displayed properly depending on the

computer (video card) to be connected.

• Use the automatic screen adjustment when a computer

screen is displayed for the first time using D-SUB (PC)

(INPUT5), or when the setting of the computer is changed.

The screen is adjusted automatically using AUTO SYNC. in

SCREEN of the OTHERS menu.

• If the audio output from the playback device is connected

directly to speakers or other devices, the video on the

monitor may appear delayed from the audio portion.

Audio should be played through this monitor by connecting

the playback device to the monitor’s audio input, and

connecting the monitor’s audio output to the speakers or

other devices.

HDMI1 input terminal (INPUT1)

2. HDMI2 input terminal (INPUT2)

3. HDMI3 input terminal (INPUT3)

• Use a commercially available HDMI cable (conforming to

the HDMI standard).

• To input only video by HDMI and input audio by

analog, connect to the HDMI2 input terminal and select

HDMI+ANALOG in AUDIO SELECT of the OTHERS

menu. When HDMI is selected, connection to the audio

input terminal is unnecessary.

4. D-sub input terminal (INPUT5)

5. Audio input terminal (for INPUT2/INPUT5)

• Use an audio cable without resistance.

• When using for INPUT2, select HDMI+ANALOG in AUDIO

SELECT of the OTHERS menu.

6. AV component input terminals (INPUT4)

• This can be used as an AV video input terminal. Connect

to the [VIDEO] input terminal, and change INPUT

SELECT to VIDEO of the OTHERS menu.

7. Audio input terminals (for INPUT4)
8. USB port (for touch panel)

• To use the touch panel, connect to your computer with the

provided USB cable.

9. RS-232C input terminal

• You can control the monitor from a computer by

connecting a commercially available RS-232 straight

cable between this terminal and the computer.

10. Audio output terminal

• The output sound varies depending on the input mode.

4
5

1
2

Содержание PN-70SC5










































Результаты поиска

Содержание PN-70SC5

Отзывы:

Похожие инструкции для PN-70SC5

Бренды по названию

Популярные бренды

Sharp PN-70SC5, Руководство по эксплуатации

Результаты поиска

Содержание PN-70SC5

Отзывы:

Похожие инструкции для PN-70SC5

Бренды по названию

Популярные бренды