background image

Important

Information

4

Outstanding Features

H

L

X

1. ADVANCED 

COMPATIBILITY

 WITH HIGH-END WORKSTATIONS

AND PCS

Compatible with up to 85 Hz vertical refresh rate, Sync on Green and 

Composite Sync

 signals for

use with a wide variety of high-end PCs and Workstations. (Page 12)

2. 3D DIGITAL UNIFORMITY

Equipped with new 3D digital uniformity technology for a clearer, more uniform image.

3.

ACTIVE DIGITAL KEYSTONE CORRECTION

Corrects keystone distortion caused when the projected image is not perpendicular to the screen.
This method provides not only horizontal correction, but vertical as well, thus maintaining the
original 4:3 aspect ratio and eliminating jag lines. (Page 20)

4. EASY-TO-USE GRAPHICAL USER INTERFACE (GUI)

A multi-colour menu system allows for simple image adjustments. (Page 23)

5. AUTO SYNC TECHNOLOGY FOR AUTOMATIC IMAGE

PERFECTION

Automatically makes any necessary adjustments for perfectly synced computer images. (Page
28)

6.

INTELLIGENT COMPRESSION

 

AND EXPANSION

By using intelligent resizing technology, this projector can display higher and lower resolution images in detail without
compromising quality. (Page 33)

7. GAMMA CORRECTION FUNCTION

Offers richer image viewing with dark scene phase and contrast correction according to image and room brightness. Three
gamma settings are available. (Page 32)

8. POWER SAVE MODE FUNCTION

Function with toggle switch to control the quantity of projected light. Select “ON” or “OFF” to decrease or increase brightness,
power consumption and fan noise. (Page 35)

9.

XGA RESOLUTION 

FOR HIGH RESOLUTION PRESENTATIONS

With XGA (1,024 

 768) resolution, this projector can display very detailed presentation information.

10. SXGA COMPATIBLE

SXGA (1,280 

 1,024) resolution images are intelligently resized to 1,024 

 768 for full-screen.

Содержание PG-C20XE - Notevision SXGA LCD Projector
























































Отзывы: