Bread can be automatically kept warm for 1 hour after baking. During keeping warm, if you would
like to take the bread out, switch the program off by pressing the START/STOP button. After
baking, the LCD displays “0:00” and beeps will be heard. Then go back to the default setting of
the machine. NOTE: The programs of Dough and Jam do not have the function to keep warm.
KEEP WARM
If the power supply has been interrupted during the course of making bread, the process of
making bread will be continued automatically within 10 minutes, even without pressing
START/STOP button. If the interruption time exceeds 10 minutes, the memory cannot be kept, you
must discard the ingredients in the bread pan and add the ingredients into bread pan again, and
the bread maker must be restarted. If the dough has not entered the rising phase when the power
supply breaks off, you can press the START/STOP directly to continue the program from the
beginning.
MEMORY
The machine may work well in a wide range of temperature, but there may be some difference in
loaf size between a very warm room and a very cold room. We suggest that the room temperature
o
o
should be within the range of 15 C to 34 C.
ENVIRONMENT
1. If the display shows
“HHH”
after you have pressed
START/STOP
button, 5 beeps will be
heard, it means that the temperature inside is still too high. The program will not be
performed. Open the lid and let the machine cool down for 10 to 20 minutes.
2. If the display shows
“LLL”
after you have pressed
START/STOP
button, 5 beeps will be
heard, it means that the temperature inside of bread pan is too low. The bread maker should
be placed into environment of higher temperature for use (Except the program of
Bake
).
3. If the display shows
“EE0”
after you have pressed
START/STOP
button, beeps will be heard,
it means the temperature sensor open circuit, press
START/STOP
button to stop beeps
sound, but the
“EE0”
in the LCD will continue flashing, please check the sensor carefully with
an authorized expert. If the display shows
“EE1”
, it means the temperature sensor short
circuited.
WARNING DISPLAY
The appliance may emit a little smoke and a specific smell when you turn it on for the first time.
This is normal and will soon stop. Make sure the appliance has sufficient ventilation.
1. Please check whether all parts and accessories are complete and free of damage.
2. Clean all the parts according to the section “
Cleaning and Maintenance
”.
3. Set the bread maker on Bake mode and bake empty for about 10 minutes. Then let it cool
down and clean all the detached parts again.
4. Dry all parts thoroughly and assemble them, the appliance is ready for using.
BEFORE THE FIRST USE
07
