Sharp PC-MR70, Руководство пользователя

Страница: 47 / 93

4-7
4
3. In Driver Mode , select Single .
4. In
Primary
, if you want to use the external monitor, select
VGA1
. If the internal
LCD screen, select LCD2 ; then click OK .
5. In Compatibility Warning dialog box, select Apply the settings without
restarting? and click OK twice.
6. Click OK twice.
•
If you want to display the same image to both the external and internal
display simultaneously, select
Mirror in the step 3 above.
•
While playing video or animation, or using a game software, you may
not be able to switch the display.
Changing Brightness of the display
To change the brightness of internal LCD screen; use the following key
combinations.
Press
Fn + F6 Decreases the brightness of the screen.
Press
Fn + F7
Increases the brightness of the screen.
Press Fn + F8 Maximizes the brightness of the screen. Pressing the
combination again set the brightness to the previous settings.
Changing Resolution and Number of Colours
When shipped, your computer is set to the default resolution and colour. The default
resolution is 1024 x 768 at 64k colour. To change the resolution and the number of
colours, perform the following steps. This process is also effective to the external
monitor connected to your computer.
1. In the Display Properties dialog box, select Settings .
2. Select the number of the colours in the
Colours
, and select the resolution in
Screen area . Refer to the table below.
3. Click OK twice.
Resolutions and Colours you can choose
Resolitions
640 x 480, 800 x 600,1024 x 768, 1280 x 1024
*1
,1600 x 1200
*2
Colours 256, 64K, 260K
*1 Not available in simultaneous displays.
*2
Available only on the external display compliant to this resolution.