Sharp Notevision PG-F211X Скачать руководство пользователя страница 65

Страница: 65 / 70

Appendix

Problem

Maintenance indicator on

the projector illuminates

or blinks in red.

The projector cannot

be turned on or put into

the standby mode

using

STANDBY/ON

the projector.

Picture is green on

COMPUTER

(Component)/

DVI (Component).

Picture is pink

(no green) on

COMPUTER (RGB)/

DVI (RGB).

Picture is too bright and

whitish.

The cooling fan becomes

noisy.

The lamp does not light

up even after the

projector turns on.

The lamp suddenly turns

off during projection.

The image sometimes

flickers.

The lamp needs much

time to turn on.

Picture is dark.

The remote control

cannot be used.

Check

• See “Maintenance Indicators”.

• The keylock is set.

If the keylock is set to “ON”, all the buttons are locked.

• Change the input signal type setting.
• When you cannot select an input signal type, select “Color is faded

or poor” in the “Help” menu, after selecting an item other than
“sRGB” in “Picture Mode”, and then select an input signal type.

• Image adjustments are incorrectly set.

• When temperature inside the projector increases, the cooling fan

runs faster.

• The lamp indicator is illuminating in red.

Replace the lamp.

• Cables are incorrectly connected to the projector or the connected

equipment works improperly.

• Select “Vertical stripes or flickering image appear” in the “Help”

menu and make the necessary adjustments.

• If this happens frequently, replace the lamp.

• The lamp will eventually need to be changed.

While the remaining lamp life draws to a close, replace the lamp.

• Operate the remote control while pointing it at the projector’s remote

control sensor.

• The remote control may be too far away from the projector.
• If direct sunlight or a strong fluorescent lamp is shining on the

projector’s remote control sensor, place the projector where it will not
be affected by strong light.

• The batteries may be depleted or inserted incorrectly. Make sure the

batteries are inserted correctly or insert new ones.

Page

This unit is equipped with a microprocessor. Its performance could be adversely affected by incorrect operation
or interference. If this should happen, unplug the Unit and plug it in again after more than 5 minutes.

Содержание Notevision PG-F211X







































































Результаты поиска

Содержание Notevision PG-F211X

Отзывы:

Похожие инструкции для Notevision PG-F211X

Бренды по названию

Популярные бренды

Sharp Notevision PG-F211X, Руководство по эксплуатации

Результаты поиска

Содержание Notevision PG-F211X

Отзывы:

Похожие инструкции для Notevision PG-F211X

Бренды по названию

Популярные бренды