Sharp MX-M2651 Скачать руководство пользователя страница 14

Страница: 14 / 67

General Problems

THE ORIGINAL MISFEEDS (AUTOMATIC DOCUMENT

FEEDER)

Check

Solution

Is too much paper loaded into the
document feeder tray?

■

Make sure that the stack of paper in the tray is not higher than the indicator line.

► Placing the original and adding paper (page 5)

Is the original a long original?

■

When using the automatic document feeder to scan a long original, set the scan

size to [Long Size].

(Note that long originals cannot be copied using the copy function.)

Is the original on thin paper?

■

Use the document glass to scan the original.

If you need to use the automatic document feeder, use [Slow Scan Mode] in
[Others] to scan the original.

Is the feed roller dirty?

(In a reversing single pass feeder (RSPF))

■

Clean the surface of the paper feed roller.

► Maintenance (page 6)

THE PAPER MISFEEDS

Check

Solution

Is a torn piece of paper remaining in
the machine?

■

Follow the instructions in the touch panel to remove all paper.

Is too much paper loaded in the tray?

■

Reload the paper. Load no more than the maximum number of sheets and do not

exceed the indicator line.

► Placing the original and adding paper (page 5)

Are multiple sheets feeding at once?

■

Fan the paper well before loading it.

Are you using paper that is not within
the specifications?

■

Use SHARP-recommended paper.

Using paper that is for other models or special paper that is not supported may
result in misfeeds, creases, or smudges.



- "SUPPLIES" in Start Guide

For paper that is prohibited or not recommended, see User's Manual.

Are the bypass tray guides adjusted
to the width of the paper?

■

Adjust the bypass tray guides to the width of the paper so that they slightly

contact the sides of the paper.

► Placing the original and adding paper (page 5)

Is the bypass tray extension guide
pulled out?

■

When loading large-size paper, pull out the extension guide.

► Placing the original and adding paper (page 5)

Is the bypass feed roller dirty?

■

Clean the surface of the bypass feed roller.

► Maintenance (page 6)

Is A5 (5-1/2" x 8-1/2") size paper
loaded?

■

When loading A5 (5-1/2" x 8-1/2") size paper, place the paper in the horizontal

(A5R (5-1/2" x 8-1/2"R)) orientation. (Excluding tray 1 and the bypass tray)

Is the paper size specified?

■

If you are using a non-standard size, be sure to specify the paper size.

If the size of paper loaded into a tray was changed, be sure to check the paper size setting.



"Settings" → [System Settings] → [Common Settings] → [Paper Settings] →
[Paper Tray Settings] → [Tray Registration]

Содержание MX-M2651




































































Результаты поиска

Содержание MX-M2651

Отзывы:

Похожие инструкции для MX-M2651

Бренды по названию

Популярные бренды

Sharp MX-M2651, Руководство по устранению неисправностей

Результаты поиска

Содержание MX-M2651

Отзывы:

Похожие инструкции для MX-M2651

Бренды по названию

Популярные бренды