manualshive.com logo in svg

Sharp MX-M264N, Руководство по эксплуатации, Страница: 94 / 799

Поделиться
Скачать
Sharp MX-M264N Скачать руководство пользователя страница 94

1-53

BEFORE USING THE MACHINE

Contents

5

Close the front cover.

Caution

•

Do not throw a toner cartridge into a fire. Toner may fly and cause burns.

•

Store toner cartridges out of the reach of small children.

•

If a toner cartridge is stored on end, the toner may harden and become unusable. Always store toner cartridges on their 
side.

•

If a toner cartridge other than a SHARP-recommended toner cartridge is used, the machine may not attain full quality 
and performance and there is a risk of damage to the machine. Be sure to use a SHARP-recommended toner cartridge.

• Keep the used toner cartridge in a plastic bag (do not discard it). Your service technician will collect the used toner 

cartridge.

• To view the approximate amount of toner remaining, continually touch the [COPY] key during printing or when the machine 

is idle. The percentage of toner remaining will appear in the display while the key is touched. When the percentage falls to 
"25-0%", obtain a new toner cartridge and keep it ready for replacement.

• Depending on your conditions of use, the color may become faint or the image blurred.

• If carrying out continuous copying, or if copying originals with large areas of black, copying may be interrupted and the 

message “Please wait. Toner is being supplied.” may appear even though there is sufficient toner still remaining. When 
this happens, the machine will feed toner for approximately three minutes. Once feeding of the toner is complete, copying 
will resume.

Содержание MX-M264N
































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов