manualshive.com logo in svg

Sharp MX-M264N, Руководство по установке, Страница: 19 / 65

Поделиться
Скачать
Sharp MX-M264N Скачать руководство пользователя страница 19

MX-M264U  MX-DS16/DS17 (LOW STAND/HIGH STAND)  6 – 2

4)

Put the copier (or the paper feed unit) on the desk.
Insert the positioning pins (2 pcs.) of the desk into the position-
ing holes of the copier (or the paper feed unit). 
At that time, be careful not to break the fixtures on the desk
side.

5)

Connect the copier with the desk.
Connect the copier with the desk with two screws (P tight,
packed together with the copier) and the fixture.

6)

Remove the two screws, and remove the rear cover.

7)

Connect the copier (or the paper feed unit) and the desk with
two screws (P tight) and two screws (S tight) packed together
with the copier. When connecting, be careful of the direction of
the connecting fixture of the copier.

8)

Attach the rear cover, and fix it with the two screws.

9)

Install the paper tray.
Install the paper tray to the original position.

ུఘ

Positioning pin

Copier

Be careful not to hit.

Machine stand

Fixture

Positioning pin

Front side

Screws (P tight)

Screws (P tight)

Back side

Copier
connecting
fixture

Screws (P tight)

Screws (P tight)

Screws (S tight)

Copier
connecting
fixture

Screws (S tight)

Содержание MX-M264N


































































Отзывы:

Нет отзывов