MX-CFX1 ADJUSTMENTS 8 – 1
MX-CFX1
Service Manual
[8] ADJUSTMENTS
1. Paper width detection level setting
(adjustment)
1) Enter the diag mode.
Press and hold PUNCH key and START key, and turn on the
power of the main unit.
The LCD display of the main unit turns on and off, then turns
on again.
Check that LED1 is flashing, and release PUNCH key and
START key.
2) Press START key.
The display changes to the diag mode.
3) Press PUNCH key and STAPLE key to set to the paper width
detection level setting (adjustment) mode.
The diag mode is displayed by combination of LED lighting.
4)
Press START key. (The selected diag mode is executed.)
5)
Check that LED2 is flashing, and set the paper guide to the
max. width position.
6)
Press START key.
7)
Check that LED3 is flashing, and set the paper guide to A4R
width position.
8)
Press START key.
9)
Check that LED4 is flashing, and set the paper guide to A5R
width position.
10) Press START key.
11) Check that LED5 is flashing, and set the paper guide to the
min. width position.
12) Press START key.
When setting (adjustment) is completed normally, LED1 lights up.
When it is failed, LED1 flashes more rapidly.
LED 6
LED 5
LED 4
LED 3
LED 2
LED 1
START key
PUNCH key
Operator panel
STAPLE key
: Lighting
: OFF
Diag mode
No.
Diag mode
LED lighting
11
Paper width detection level
setting (adjustment) mode
6 5 4 3 2 1
