Sharp MX-C407F Скачать руководство пользователя страница 123

Страница: 123 / 200

Maintaining the printer

Warning—Potential Damage: Failure to maintain optimum printer performance, or to replace parts and

supplies, may cause damage to your printer.

Adjusting the speaker volume

Adjusting the default internal speaker volume

From the control panel, navigate to:
Settings > Device > Preferences > Audio Feedback

Adjust the volume.

Notes:

•

If Quiet Mode is enabled, then audible alerts are turned off. This setting also slows the printer

performance.

•

The volume resets to the default value after the session is logged out or when the printer wakes from

Sleep or Hibernate mode.

Configuring the fax speaker settings

From the home screen, touch Settings > Fax > Fax Setup > Speaker Settings.

Do the following:

•

Set the Speaker Mode to Always On.

•

Set the Speaker Volume to High.

•

Activate the Ringer Volume.

Networking

Connecting the printer to a Wi

‑

Fi network

From the home screen, navigate to:
Settings > Network/Ports > Wireless

Select Setup On Printer Panel and then follow the instructions on the display.

Note: For Wi

‑

network

‑

ready printer models, a prompt for Wi

‑

Fi network setup appears during initial

setup.

Maintaining the printer

123

Содержание MX-C407F









































































































































































































Результаты поиска

Содержание MX-C407F

Отзывы:

Sharp MX-C407F, Руководство пользователя, Страница: 123 / 200

Результаты поиска

Содержание MX-C407F

Отзывы: