MX-5111N MX-FN10 (SADDLE STITCH FINISHER) 12 – 3
2)
Fix the paper holding A with fixing screws A (Packed items).
3)
Installation of tee saddle tray (Packed items) and paper hold-
ing B (Packed items).
C. Staple cartridge installation
1)
Insert the staple cartridge (Packed items).
D. Height adjustment of the finisher
1)
Put the finisher closer to the main unit, and check to insure that
the guide pin is smoothly inserted into the connection hole.
* If the guide pin is not inserted smoothly, perform the follow-
ing adjustment.
(1) When the guide pin is not fit with the connection
hole in the finisher:
1)
Loosen the fixing screw of the adjustment section on the rear
side. Adjust the height adjustment screw so that the guide pin
is fit with the connection hole in the finisher.
* By making space between the main body and ground, the
adjustment screw can be turned by the finger.
2)
Remove the two screws, and remove the front under cover
and foot cover.
Guide pin
Connection hole
A
A
1
2
2
1
