Sharp MD-X60H, Руководство по обслуживанию

Страница: 8 / 104

MD-X60H
– 8 –
S
E
TTI
NG
THE
CLO
CK
1
Press the ON/STAND-BY button to turn the power on.
2
Press the TIMER/DELETE button.
3
Within 10 seconds, turn the jog dial until "TIME ADJUST" appears.
4
Within 10 seconds, press the ENTER button.
The unit will enter the date setting mode.
5
Adjust the "day" using the jog dial.
When you turn the jog dial by one click position the day will change up or down by one. When you turn the jog dial continuously, the day will change repeatedly until the jog dial is released.
6
Press the ENTER button to set the "day".
7
Adjust the "month" using the jog dial.
8
Press the ENTER button to set the "month".
9
Adjust the "year" using the jog dial.
The year 2000 or later is set as follows: [00] indicates the year 2000. [01] indicates the year 2001. The range of dates that can be entered is from January 1, 1997 to December 31, 2099.
10
Press the ENTER button to set the "year".
The unit will enter the time setting mode.
11
Adjust the "hour" using the jog dial.
When you turn the jog dial and let go, the hour will change up or down by one. When you turn and hold it, the hour will change continuously.
12
Press the ENTER button to set the "hour".
13
Adjust the "minute" using the jog dial.
14
Press the ENTER button to set the "minute".
The clock starts operating from "0" seconds. (Seconds are not displayed.)
ON/
STAND-BY
TIMER /
DELETE
ENTER
2 14
12 13
3 4 5 6 7 8 9 10
11
Notes:
In the event of a power failure or when the AC power lead is disconnected, the clock setting will be lost. Reset the time. Whilst recording an MD, you cannot set the date and clock. Be sure to set the date and clock before recording.
Resetting the date and time:
Once you have set the date and time, "TIME ADJUST" will not be displayed in step 2. Turn the jog dial to make the date and time appear. If you don't need to change the settings, just press the ENTER button without turning the jog dial again.
Checking the date and time: Press the TIMER/DELETE button. Then turn the jog dial until the date and time are displayed.
Press the DISPLAY button to switch between the date and the time. After about 10 seconds, the original display will appear. Once the date and the time have been set, this unit will normally display the time when the unit is in the stand-by mode. To check the date, press the DISPLAY button. The display will switch between the date and the time each time you press the button.
(Main unit operation)
Jog dial
Date setting mode Time setting mode
M
IN
ID
ISC
SY
ST
E
M
L
IM
IT
A
T
ION
S
Even if the maximum recording time of a MiniDisc has not been reached, "TOC FULL" may be displayed. Even if the maximum recording time of a MiniDisc has not been reached, "DISC FULL" may be displayed. Even if several short tracks are erased, the remaining rec- ording time may not show an increase. Two tracks may not be combined in editing. The total of the recorded time and time remaining on a disc may not add up to the maximum possible recording time. If recorded tracks are fast reversed or fast forwarded, the sound may skip.
In the MD system, the delimiter of the recording area on an MD is programmed in a TOC. If partial erasing, recording and editing are repeated several times, TOC information will fill up, even though the number of tracks has not reached the limit (255 tracks), and further recording will be impossible. (If you use the all erase function, this MD can be used from the beginning.) If there is any flaw on the MiniDisc, that part is automatically excluded from the space available for recording. Therefore, the recording time becomes shorter. When the remaining recording time of a disc is displayed, short tracks less than 12 seconds long may not be included in the total. F
o
r
M
ini
D
isc
s
o
n
w
h
ic
h
re
pe
at
e
d
r
e
c
o
rd
in
g an
d ed
it
in
g op
er
a
tio
ns
w
e
re
pe
r-
formed, the COMBINE function may not work. A track recorded from a CD (digital recording) and a track recorded from a radio or other equipment (analogue recording) cannot be combined. A cluster (about 2 seconds) is normally the minimum unit of recording. So, even if a track is less than 2 seconds long, it will use about 2 seconds of space on the disc. Therefore, the time actually available for recording may be less than the remaining time displayed. If there are scratches on discs, those sections will be automatically avoided (no recording will be placed in those sections). Therefore, the recording time will be reduced. An MD which has been recorded or edited repeatedly may skip during fast reverse or fast forward.
TRO
UBLE
S
H
O
O
TI
NG
If a problem occurs
If this unit functions abnormally during operation, first check the following items. If the unit continues to function abnormal
ly, or if an abnormality
appears other than listed below, set this unit to the stnad-by mode and disconnect the AC power p
lug, then consult your SHARP d
ealer or service
personnel. General
SYMPTOM
POSSIBLE CAUSE
REMEDY
The clock is wrong.
Did a power failure occur?
Try setting it again.
When a button is pressed, the unit does not respond.
Set this unit to the stand-by mode and then turn it back on. Then, retry the operation.
No sound is heard.
Is the volume level is set to "0"? Are the headphones connected? Are the speaker wires disconnected?
Increase the volume level. Disconnect the headphones. Connect the wires securely.
Radios make unusual noise or the picture on the TV screen is distorted.
When a radio or TV which uses an indoor aerial is placed near the unit, the picture on the TV screen may be distorted or the radio may not function properly.
It is recommended that you use an external aerial.
CD playback
SYMPTOM
POSSIBLE CAUSE
REMEDY
Even though a disc has been loaded, "NO DISC" or "ERR" is displayed. Playback stops in the middle of a track, or playback is not performed properly. Playback sounds are skipped.
The disc is loaded up-side down. The disc is very dirty. The disc which does not satisfy the stand
-
ards. Is
t
he unit
locat
ed near
excessive
vi
br
a
-
tions? Has condensation formed inside the unit?
Load the disc with the correct side up. Clean the disc. Load the correct disc. Place the unit on a firm, level surface free from vibration. R
e
m
o
ve
the di
sc and le
ave t
h
e
p
o
w
e
r
turned on. The unit should function properly in about 1 hour.
OPERATION MANUALNAMES OF PARTS