Sharp MD-SR75H Скачать руководство пользователя страница 42

Страница: 42 / 48

Web-site: www.sharp.co.uk/support Help Line: 0990 274277 (office hours)

Error Messages

ERROR MESSAGES

BATT EMPTY

(LoBATT)

BLANK MD

(BLANK)

Can’t COPY

(Can’tC)

Can’t EDIT

(Can’tE)

Can’t READ (*)

(Can’tS)
(Can’tT)
(Can’tU)

Can’t REC

(Can’tR)

Can’t STAMP

Can’t WRITE

(Can’tW)

DEFECT

(DEFECT)

DISC FULL

Er-MD (**)

(ErMD*)

HOLD

(HOLD)

LOCKED

(Can’tLOCK)

MEANING

●

The battery is run down.

●

Nothing is recorded.

●

You tried to record from a copy pro-
hibited MiniDisc.

●

A track cannot be edited.

●

The disc data cannot be read be-
cause the disc is damaged.

●

Recording cannot be performed cor-
rectly due to vibration or shock.

●

Stamp function does not work.

●

Cannot save the TOC information
correctly to a MiniDisc. (A large por-
tion of the disc has been damaged.)

●

The disc is scratched.

●

The disc is out of recording space.

●

The microprocessor has reported a
system fault and the unit is out of or-
der.

●

The unit is in the hold mode.

●

You removed a MiniDisc whilst re-
cording or editing.

REMEDY

●

Charge the rechargeable battery or replace the alka-
line battery (or use the AC adaptor for power).

●

Replace the disc with a recorded disc.

●

Record using the analogue cable.

●

Change the stop position of the track and then edit it.

●

Reload the disc.

●

Replace it with another recorded disc.

●

Re-record or replace it with another recordable disc.

●

Check the number of tracks.

●

Replace the disc with another recordable disc.

●

If the sound you hear is not right, record again.

●

Replace the disc with another recordable disc.

●

Replace it with another recordable disc.

●

To have it repaired, go to the distributor where you
purchased the unit.

●

Return the HOLD switch to its original position.

●

Turn off the power and remove the MiniDisc.

References

– Error Messages –

( ) : Error messages seen on the remote control.
Number or symbol appears in (*) position.

Содержание MD-SR75H

















































Результаты поиска

Содержание MD-SR75H

Отзывы:

Похожие инструкции для MD-SR75H

Бренды по названию

Популярные бренды

Sharp MD-SR75H, Руководство по эксплуатации

Результаты поиска

Содержание MD-SR75H

Отзывы:

Похожие инструкции для MD-SR75H

Бренды по названию

Популярные бренды