23
Web-site: www.sharp.co.uk/support Help Line: 0990 274277 (office hours)
Useful Features
–
Advanced Recording –
To create your own track numbers
You can create your own track numbers at any point.
Whilst recording, press the REC button at the
point where you want to create track numbers.
The track number will be increased by one.
●
One track number will be created every time the REC
button is pressed.
●
The SOUND button on the remote control can also be
used to create track numbers.
Recording tracks as a single track
You can record several pieces of music as a single
track by disabling the auto marker function.
When a recording is paused or whilst recording…
Press the EDIT button.
Note:
●
When making digital recordings using a CD player or an
MiniDisc player, track numbers will be created automati-
cally regardless of the setting of the auto marker function.
Advanced Recording : continued
Helpful tip when attaching a label
When attaching a label to an MiniDisc cartridge, be sure to
note the following. If the label is not attached properly, the
MiniDisc may jam inside the unit and it may not be pos-
sible to remove it.
●
If the label peels off or partially lifts
away, replace it with a new one.
●
Do not put a new label on top of an
existing one.
●
Attach the label only in the specified
location.
To prevent recorded MiniDiscs from
being erased accidentally
Slide the accidental erase prevention tab, located
on the side of the MiniDisc, in the direction indi-
cated by the arrow.
●
The MiniDisc will then be protected against accidental
erasure.
To add a recording to such a MiniDisc, slide the acci-
dental erase prevention tab back to its original position.
Recordable
Recording
prevented