Sharp MD-SR60E Скачать руководство пользователя страница 29

Страница: 29 / 48

Using with the rechargeable or alkaline battery

Disconnect the AC adaptor.

Insert the rechargeable
battery or alkaline battery
from the (+) marked side.

●

Use a commercially available
LR6, “AA” size alkaline battery.

Useful Features

Notes:

●

Setting the volume level to “0” whilst recording with the
rechargeable or an alkaline battery reduces the battery
drain.

●

When you do not use the unit for hours, remove the bat-
tery. (The battery drains gradually even when the power
is turned off.)

●

Carry the battery in the supplied case.

●

This unit can be used with the AC adaptor when the re-
chargeable or an alkaline battery is in the unit.

●

After the rechargeable battery is charged or used, it will
get slightly warm. This is nomal.

Caution:

●

Do not use a nickel-cadmium battery.

About charging time

After about 3.5 hours have passed, “

” will go out.

The battery charging is about 90% complete.

To charge the battery fully, continue charging for
about 2 more hours.

( In this case, you do not need to press the :OFF/CHRG
(•

■

) button. Even if the :OFF/CHRG (•

■

) button is

pressed, “

” will not appear.)

Notes:

●

This unit should only be used within the range of 0

C -

C (32

F - 104

F).

●

Charge the battery within the range of 5

C - 35

C (41

F - 95

F).

●

Charging is completed when “

” does not blink when you

plug in the AC adaptor and press the :OFF/CHRG (•

■

) button.

●

The unit can be left in the charging state after it is completed.

Battery Power : continued

Caution:

●

Use the specified battery AD-N70BT only. Do not charge
a battery (nickel-cadmium, alkaline, etc.) other than that
specified.

●

Do not remove the outer cover of the re-
chargeable battery. It may cause heat gen-
eration, fire, or explosion.

●

Do not dip the battery in water, do not dis-
pose of it in a fire, and do not take it apart.

●

If the rechargeable battery terminal is dirty, charging may
not start. In such a case, wipe off the dirt with a dry cloth.

●

Do not disassemble the battery.

**04-USEFUL FEATURES 2

02.07.2000, 10:05 AM

Содержание MD-SR60E

















































Результаты поиска

Содержание MD-SR60E

Отзывы:

Похожие инструкции для MD-SR60E

Бренды по названию

Популярные бренды

Sharp MD-SR60E, Руководство по эксплуатации

Результаты поиска

Содержание MD-SR60E

Отзывы:

Похожие инструкции для MD-SR60E

Бренды по названию

Популярные бренды