MD-R3
– 26 –
9. TEST-PLAY mode
Step 1
Testmode STOP state
[ t s m
e
]
Step 2
Press the TIMER/DELETE/CLEAR button. TEST-PLAY menu
[ T E S T _ P L A Y _ ]
Step 3
Press once the DISPLAY/
ADRES setting (Target address initial value is indicated)
[ A D R E S _ 0 0 5 0 ]
CHARACTER button.
During search the search output is set to "H", and it is
Press once the MD PLAY button. returned to "L" when continuous playback is started.
Step 4
Continuous playback (pit section) (A C1 error indication)
[s
c
]
Continuous playback (groove section) (A C1 error indication)
[a
c
]
Step 5
Press once the DISPLAY/
(A ADIP error indication)
[a
a
]
CHARACTER button.
Step 6
Press once the MD STOP button. TEST-PLAY menu
[ T E S T _ P L A Y _ ]
Step No.
Setting Method
Remarks
Display
• If the MD STOP button is pressed while the TEST-PLAY menu is displayed, TEST mode STOP state is set.
• If the MD PLAY button is pressed while the TEST-PLAY menu is displayed, continuous playback is started from the current pickup position.
• Whenever the TIMER/DELETE/CLEAR button is pressed in the address setting mode, the address changes as follows.
0 0 5 0
→
0 3 C 0
→
0 7 0 0
→
0 8 A 0
→
0 0 5 0
→
…………
• Whenever the DISPLAY/CHARACTER button is pressed in the address setting mode, the digit which is changed with -
/
+ changes
as follows.
0 0 5 0
→
0 0 5 0
→
0 0 5 0
→
0 0 5 0
→
…………
• The digit of address which has been specified with -
/
+ and DISPLAY/CHARACTER button in the address setting mode is set to +01H/
-01H.
* If the -
/
+ button is held down, the setting changes continuously with 100 ms cycle.
• If the NAME/TOC EDIT button is pressed in the continuous playback mode, the number of jump lines changes as follows.
1 line
→
10 line
→
400 line
→
1 line
→
…………
* After the number of jump lines is indicated for one second, the address indication is restored.
[
T R _ J U M P ]
• If the -
/
+ button is pressed in the continuous playback mode, the specified number of lines is jumped in the FWD/REV
direction.
* If the -
/
+ button is held down, the setting changes with 100 ms cycle.
g) ADJUST setting
Step 1
Test mode STOP state
[ t s m
e
]
(or continuous record/playback state or specific menu
state of other mode)
Step 2
Input the B2h command 7 times, including NOP
EEPROM setting menu
[E E P R O M _ S E T]
(or input once the B2h command and input once the
A8h command)
The specific setting is read from EEPROM.
Step 3
A2h command input
Focus setting menu
[ _ _ F o c u s _ _ _ ]
Step 4
Input the B2h command 6 times, including NOP.
CONTROL setting menu
[ _ A D J U S T _ _ _ ]
Step 5
A2h command input
COUT level calculation cofficient setting
[ C O K _ _ _ _ _
]
Step 6
B2h command input
Focus system reference value setting
[ F A T _ _ _ _ _
]
Step 7
B2h command input
Tracking system reference value setting
[ T A T _ _ _ _ _
]
Step 8
B2h command input
Track cross system reference value setting
[ C A T _ _ _ _ _ _
]
Step 9
B2h command input
Focus balance correction value setting
[ F A B _ _ _ _ _ _
]
Step 10
B2h command input
Tracking ATT shift value setting
[ S T R _ _ _ _ _ _
]
Step 11
B2h command input
Focus ATT shift value setting
[ S F S _ _ _ _ _ _
]
Step 12
B2h command input
TCRS ATT shift value setting
[ S T C _ _ _ _ _ _
]
Step No.
Setting Method
Remarks
Display
: Setting volue
• Input of A8h command results in reversing.
• When the F3h command is input in the setting item indication state, the setting increases, and the new setting is et in LSI.
• When the F4h command is input in the setting item indication state, the setting increases, and the new setting is et in LSI.
• When the F3h/F4h command is input continuously, continuous change occurs with 100 ms cycle.
• When the A7h command is input in the EEPROM setting menu state, the state is changed to TEST mode stop state.
• When the A7h command is input in the ADJUST setting menu state, the state is changed to EEPROM setting menu state.
• When the A7h command is input in the specific setting item indication state, the state is changed to the ADJUST setting menu state.
