manualshive.com logo in svg

Sharp MD-MX20H, Руководство по эксплуатации, Страница: 30 / 52

Поделиться
Скачать
Sharp MD-MX20H Скачать руководство пользователя страница 30

29

(Continued)

■

 EON-TI

1

Tune in the desired RDS station (when a station name
is being displayed).

EON

2

Press the EON button when "EON" appears.

●

"PTY TI" and "SELECT" will appear alternately for about 6
seconds.

3

Whilst they are being displayed, select the TI (Traffic
Information) by turning the jog dial.

4

Within 4 seconds, press the PTY.TI SEARCH button.

EON
TI

●

"TI" and "WAITING" will appear for 2 seconds each.

●

"TI" will appear, and the unit will enter the EON-TI stand-
by mode.

5

When a TA specified starts on an ON (other network)
station, the unit will automatically switch to that sta-
tion, and "TI" will flash.

TI

6

When the traffic announcement is over, the unit will
automatically return to the original station you were
tuned to.

●

If the EON button is pressed when "EON" is not displayed,
"NO EON" will appear for 5 seconds to indicate that the
unit cannot enter the EON stand-by mode.

Checking the stand-by mode setting:

When in the EON stand-by mode, press the EON button.
("TI" 

→

"WAITING")

To cancel the EON stand-by mode:

When in the EON stand-by mode, press the EON button.
Within 4 seconds, press it again. The EON stand-by mode
will be cancelled.

●

"TI" will go out.

Note:

●

If neither "TP" nor "TA" appears, then even if "EON" ap-
pears, the unit cannot enter the EON-TI stand-by mode. In
this condition, if the PTY. TI SEARCH (PTY. TI) button is
pressed after TI is selected, "NO TI" will flash for 4 sec-
onds.

3

2

4

*23-30

00.1.13, 0:00 PM

29

Содержание MD-MX20H





















































Отзывы:

Нет отзывов