GB-5
INSTALLING YOUR VCR
TUNING THE TV INTO THE VCR
1.
Press
STANDBY
(
) to ensure your
VCR is still in the STANDBY mode.
2.
Switch on the TV. Select an unused
channel on your TV for your VCR (there
may be a dedicated video channel refer
to your TV operation manual).
3.
Press and hold the
MENU
button for 3
seconds. The VCR will search and display
the ideal RF channel.
CAUTION:
If the clear button is pressed at this point it will not allow the TV to be tuned to the VCR. Refer
to RF through ON/OFF.
4.
Tune the selected channel on your TV
(refer to your TV manual) until the menu
screen appears.
5.
Press
SET
to store the RF channel and to
place the VCR back into STANDBY.
NOTE:
✔
The TV is tuned to the VCR.
•
If you have a preferred channel, the RF channel can be set manually (21-69) after
Step 3 using [
/
] keys.
RF THROUGH ON/OFF:
•
If you wish to connect your VCR to the TV with only a scart lead, the RF Output on your
VCR can be turned OFF and ON by pressing the
CLEAR
button then
SET
to return to
STANDBY at point 2. This will help minimise interference.
VCR
Example:
MENU SCREEN
T I ME R
MOD E
GRUND E I N S T E L L UNG
: WÄH L E N
S E T
: E I NGAB E ME NU : E ND E
TINS-3799UMZZ ENGLISH.book Page 5 Thursday, April 20, 2000 9:23 AM
