GB-23
CUSTOMISED INSTALLATION
MANUALLY TUNING A CHANNEL
It should not be necessary to tune in a broadcast channel manually except in unusual
circumstances such as poor signal.
To manually tune in a channel follow the procedure below.
1.
Press
MENU
.
2.
Press [
/
] to select SET UP. Press
SET
to confirm.
3.
CHANNEL PRESET
will be
highlighted. Press
SET
.
4.
Press [
/
] to select
CHANNEL
.
5.
Press [
/
] to start tuning in either
direction. Tuning will stop when a channel
is received. If it is not the desired channel,
press [
/
] to continue tuning.
6.
Press [
/
] to select
FINE
TUNING
. Press and hold [
/
] until
the sharpest colour picture is obtained.
8.
Press [
/
] to select
SKIP
.
The SKIP function determines whether the
channel can be selected when using the
CHANNEL
/
instead of the
NUMBER BUTTONS
.
9.
Press [
/
] to select ON or OFF for
this option.
10.
Press
SET
to confirm.
11.
Press
MENU
to leave this function.
IMPORTANT NOTE:
MODEL VC-M35SM ONLY
7.
If you connect an independent
decoder, you must press [
/
] to
select DECODER, then select [
/
] to
turn the decoder function ON.
C HANN E L
P R E S E T
C HANN E L S O R T
C L O C K
L ANG UAG E
➔
P R E S E T
1
CHANN E L
CH 2 1
F I N E T UN I NG
▲
▲
D E COD E R
ON
O F F
S K I P
ON
O F F
TINS-3799UMZZ ENGLISH.book Page 23 Thursday, April 20, 2000 9:23 AM