Sharp LL-T1820-B Скачать руководство пользователя страница 7

Страница: 7 / 36

PC-UM10M

LL-T1820-H/B CONNECTION, ADJUSTMENT, OPERATION, AND FUNCTIONS

2 – 1

CHAPTER 2. CONNECTION, ADJUSTMENT, OPERATION, AND FUNCTIONS

1. CONNECTING THE MONITOR AND TURNING THE MONITOR ON AND OFF

Caution: • When connecting, ensure that both the monitor and com-

puter are switched off.

• Be careful not to overly bend the cable or add extension

cords as this could lead to malfunction.

Cable storage

If necessary, excess cable can be housed in the stand.

Remove the cover.
Gently pull the top of the cover towards yourself.

Run cable along the back of the stand.

Pass cable in front of the stand, and then bring it through the back.

• If the display is to be rotated, first house the cables with the dis-

play in the long height position, so there is sufficient length when

the display is turned.

Refit the cover.

Be careful not to pinch the cable.

• If the cover is hard to refit, do not force it. Check whether cables

are trapped.

Caution: If the display is to be rotated, first house the cable, and then

check while gently turning the display. If it cannot be turned,

rehouse the cable with sufficient slack. (If there is insufficient
cable length, rotation will be impossible. Forcing rotation may

cause cable disconnection.)

CONNECTING THE MONITOR TO A COMPUTER

Connecting the monitor to a computer using the accessory signal cable.

• This monitor has two input terminals to enable connection to two

computers. The monitor comes with one analog signal and one digital

signal cable. If both connections are analog, or both are digital, you
will need another signal cable sold separately.

• Digital signal cable: model name NL-C01E

• Analog signal cable: model name NL-C02E

Analog RGB connection

Using the accessory analog signal cable, connect to the analog RGB

output terminal of the computer.

• Paying attention to connector direction, firmly insert the signal

cable to terminal, and then tighten the screws at both sides.

If connecting to a D-sub 15 pin 2 row Apple Power Macintosh, attach a

Macintosh conversion adapter (to be purchased separately) to the ana-

log signal cable.

Input terminal 1 and 2
You can connect to
either side.

Analog RGB output
terminal

Analog signal cable

Macintosh conversion adapter

Содержание LL-T1820-B





































Результаты поиска

Содержание LL-T1820-B

Отзывы:

Похожие инструкции для LL-T1820-B

Бренды по названию

Популярные бренды

Sharp LL-T1820-B, Руководство по обслуживанию

Результаты поиска

Содержание LL-T1820-B

Отзывы:

Похожие инструкции для LL-T1820-B

Бренды по названию

Популярные бренды