Sharp LL-T1820-B, Руководство по эксплуатации

Страница: 27 / 164

27
English
Specifications
The DVI-I input connector pin
Power management
The monitor is based on the VESA DPMS*
1
and the
DVI DMPM* 2 standards.
To activate the monitor's Power Management func-
tion, both the video card and the computer must
conform to the VESA DPMS standard and the DVI
DMPM standard.
*
1
DPMS: Display Power Management Signalling
*Not using USB hub
* 2 DMPM: Digital Monitor Power Management
*Not using USB hub
DPMS mode Screen Power H-sync V-sync
consumption
ON Display on 51W
*
Yes Yes
STANDBY No Yes
SUSPEND Display off 5W Yes No
OFF No No
DMPM mode Screen Power
consumption
ON Display on 51W
*
OFF Display off 5W
No. Function No. Function
1 TMDS data 2- 16 Hot plug detection
2 TMDS data 2+ 17 TMDS data 0-
3 TMDS data 2/4 shield 18 TMDS data 0+
4 N.C. 19 TMDS data 0/5 shield
5 N.C. 20 N.C.
6 DDC clock 21 N.C.
7 DDC data 22 TMDS clock shield
8 23 TMDS clock +
9 TMDS data 1- 24 TMDS clock -
10 TMDS data 1+ C1 Analogue red image signal
11 TMDS data 1/3 shield C2 Analogue green image signal
12 N.C. C3 Analogue blue image signal
13 N.C. C4
14 +5V C5 Analogue GND
15 GND
Analogue vertically synchronised
signal
Analogue horizontally synchro-
nised signal
DDC (Plug & Play)
This monitor supports the VESA DDC (Display Data
Channel) standard.
DDC is a signal standard for carrying out Plug & Play
functions on the monitor or PC. It transfers informa-
tion such as degree of resolution between the moni-
tor and PC. You can use this function if your PC is
DDC compliant and if it is set so that it can detect
the Plug & Play monitor.
There are many varieties of DDC due to the differ-
ences between systems. This monitor works with
DDC2B.