Sharp LL-173C, Руководство по эксплуатации

Страница: 11 / 73

11
English
Deutsch
Français
Italiano
Español
English
1 4 7 8
10
11
9
5
6
2 3
1. AUTO button ............................ This button is used to perform automatic adjustment of the screen
(CLOCK, PHASE, H-POS, and V-POS). (p.17)
2. MENU button ........................... This button is used to pop-up, select, and close the On Screen
Display (OSD) Menu.
3. / MODE button ..................... When the OSD Menu is displayed:
This button is used to select menu options.
When the OSD Menu is not displayed:
This button is used to set DISPLAY MODE.
4. buttons ............................. When the OSD Menu is displayed:
These buttons are used to select an option or adjust the value of the
selected option.
When the OSD Menu is not displayed:
These buttons are used to adjust backlight brightness.
5. Power button ............................ Pressing this button turns the power on.
Press the button again to turn the power off.
6. Power LED ............................... This LED is lit green when in use and orange when in power-saving
mode.
7. Power terminal
8. Analog RGB input terminal ..... The analog signal cable is connected here. The analog signal cable
included should be used.
9. Ventilation openings ................ Never block the ventilation openings as this may lead to overheating
inside the monitor and result in malfunction.
10. Security lock anchor ................ By connecting a security lock (commercially available) to the security
lock anchor, the monitor is fixed so that it cannot be transported.
The security slot works in conjunction with Kensington Micro Saver
Security Systems.
11. Cable clamp ............................ You can use this to secure the cables connected to the terminals.
Product description