background image

4

Introduction

•  Do not place vases or any other 

water-filled containers on this 
product.
The water may spill onto the product 
causing fire or electric shock.

•  Stand—Do not place the product 

on an unstable cart, stand, tripod 
or table. Doing so can cause the 
product to fall, resulting in serious 
personal injuries as well as damage 
to the product. Use only a cart, 
stand, tripod, bracket or table 
recommended by the manufacturer 
or sold with the product. When 
mounting the product on a wall, be 
sure to follow the manufacturer’s 
instructions. Use only the mounting 
hardware recommended by the 
manufacturer.

•  Ventilation—The vents and other 

openings in the cabinet are designed 
for ventilation. Do not cover or block 
these vents and openings since 
insufficient ventilation can cause 
overheating and/or shorten the life 
of the product. Do not place the 
product on a bed, sofa, rug or other 
similar surface, since they can block 
ventilation openings. This product is 
not designed for built-in installation; 
do not place the product in an 
enclosed place such as a bookcase 
or rack, unless proper ventilation 
is provided or the manufacturer’s 
instructions are followed.

•  In case the product is dropped and 

the cabinet is damaged, be sure to 
turn off the power of the product, 
and unplug the power cord. If you 
continue to use the product, it may 
cause fire or electric shock. Contact 
your dealer.

•  Do not open the rear cover of the 

cabinet to reconstruct the circuits. 
There exists high voltage within the 
cabinet and it may cause electric 
shock and injury. If maintenance is 
required, contact your dealer.

•  The LCD panel used in this product 

is made of glass. Therefore, it can 
break when the product is struck 
forcefully or with a sharp object. If 
the LCD panel is broken, be careful 
not to be injured by broken glass.

•  Heat sources—Keep the product 

away from heat sources such as 
radiators, heaters, stoves and other 
heat-generating products (including 
amplifiers).

•  To prevent fire, never place any type 

of candle or naked flames on the top 
or near the TV set.

•  To prevent fire or shock hazard, do 

not place the AC power cord under 
the TV set or other heavy items.

•  Do not place heavy objects 

on this product or stand on it.  
Doing so could cause injury if the 
product overturns. Take special 
care near children and pets.

•  Unplug the power cord before you 

move the TV set. If not unplugged 
beforehand, the power cord may 
become damaged and cause 
electric shock.

The LCD panel is a very high technology product with 
2,073,600 pixels, giving you fine picture details.
Due to the very large number of pixels, occasionally a few 
non-active pixels may appear on the screen as a fixed point 
of blue, green, red or yellow.
This is within product specifications and does not constitute 
a fault.

Precautions when transporting the TV

•  When transporting the TV, never 

carry it by holding or otherwise 
putting pressure onto the display.
Be sure to always carry the TV by 
two people holding it with two hands 
—one hand on each side of the TV.

If a television is not positioned in a sufficiently stable location, 
it can be potentially hazardous due to falling.
Many injuries, particularly to children, can be avoided by 
taking simple precautions such as:
•  Using cabinets or stands recommended by the 

manufacturer of the television.

•  Only using furniture that can safely support the television.
•  Ensuring the television is not overhanging the edge of the 

supporting furniture.

•  Not placing the television on tall furniture (for example, 

cupboards or bookcases) without anchoring both the 
furniture and the television to a suitable support.

•  Not standing the televisions on cloth or other materials 

placed between the television and supporting furniture.

•  Educating children about the dangers of climbing on 

furniture to reach the television or its controls.

•  Do not display a still picture for a long time, as this could 

cause an afterimage to remain.

•  Install the product on the place where the AC cord can 

be unplugged easily from the AC outlet, or from the AC 
INPUT terminal on the rear of the product.

NOTE

•  The above are pictures for reference only; the actual item 

might be different.

Содержание LC-70LE735X Aquos









































































Отзывы: