50
Reset
If complex adjustments are made so that the settings
cannot be restored to normal, you can reset the settings
to the factory preset values.
1
Go to “HOME” > “TV Menu” > “Setup” > “View
setting” > “Reset”.
2
If you have already set the password, enter it here.
3
Press
c/d
to select “Yes”, and then press
A
.
• “Now, TV will restart automatically, OK?” displays on the
screen.
4
Press
c/d
to select “Yes”, and then press
A
.
• “Now initialising...” displays on the screen and blinks.
• After the reset has completed, the power shuts off and
then comes back on. The screen will have returned to its
original settings.
5
Press
a/b
to select the desired language listed
on the screen, and then press
A
.
Press
c/d
to select “HOME” or “STORE”, and
then press
A
.
6
Setting the country.
Press
a/b
to select your country or area, and
then press
A
.
• This setting screen only appears during the initial auto
installation.
7
The TV searches for and stores all the receivable
TV stations according to their settings and the
connected antenna.
• To abort the initial auto installation in progress, press
C
.
NOTE
• When the TV is in “STORE” mode, repeat steps 1 to 5 to
change to “HOME” mode.
Updating your TV via USB/Network
Information
Software update
This function allows you to update to the latest software
via a USB device or network.
1
Go to “HOME” > “TV Menu” > “Setup” >
“Information” > “Software update” > “USB
update”.
• You can also update the software through the network.
Go to “HOME” > “TV Menu” > “Setup” > “Information”
> “Software update” > “Network update” and follow the
on-screen instruction.
• A broadband connection and Network setup are
required to update the software using the internet (Pages
34–35).
2
Press
A
and then insert the USB device
containing the software update file.
CAUTION
• Be sure to insert the USB device correctly into the terminal.
3
Press
B
to close the window when a screen
prompt pops up.
4
The TV displays a confirmation screen while
checking the data in the inserted USB device.
CAUTION
• If the data is not compatible with the system, an error
message appears on the screen. Repeat steps 2 and 3 after
pressing
A
.
• When an error message displays, check to see if:
• The USB device is inserted firmly.
• The USB memory has two or more software update files.
• No data for updating the system exists in the USB memory.
• The software update file is broken.
• The software update file is not compatible with your TV’s
software.
• The current system is same as the system update data.
5
The TV displays the software version information
after checking the data.
6
Press
c/d
to select “Yes” to update the system,
and then press
A
.
7
The TV restarts automatically, and the software
update will be complete.
• This operation may take a while.
Getting information
Information
Identification
You can check the TV ID on the screen for reporting to
customer service.
Go to “HOME” > “TV Menu” > “Setup” >
“Information” > “Identification”.
Appendix
