LC-60H20T/LC-70H20T
2 – 1
CHAPTER 2.
OPERATION MANUAL
[1] OPERATION MANUAL
Attaching the stand
• Before attaching (or detaching) the stand, unplug the AC cord from the AC outlet.
• Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being damaged.
1
Confi rm the screws supplied with the TV.
(Six long screws and four short screws)
2
Insert the support angle into the stand base slot holes. (
1
)
• Please make sure left support angle into the left stand base and right support angle into the right stand base
(left side part engraved “L”, right side part engraved “R”).
3
Push the support angle follow the direction of the arrow mark on the stand base.
Push
Push the support angle follow
the direction of the arrow mark
4
For easily, user can use polystyrene foam as a jig to hold the stand base when fi xing by using the long
screws. (
2
)
2
Example for left side
2
5
Insert the stand into the openings on the bottom of the TV. (
3
)
6
Insert and tighten four short screws into the holes on the rear of the TV. (
4
)
Soft cushion
OUTPUT
DC5V 1.5A
HDMI 4
HDMI 5
USB 2
DC5V 0.5A
AUDIO IN
DIGITAL
AUDIO
OUTPUT
ANALOGUE
RGB (PC)
ARC
PC
HDMI 1
INPUT 6
INPUT 7
AUDIO OUT
R - AUDIO - L
R - AUDIO - L
R - AUDIO - L VIDEO/Y PB(CB) PR(CR)
COMPONENT/AV INPUT
VIDEO
RS-232C IOIOI
USB 1
DC5V 1.5A
(DC5V 900mA)
AUDIO(L/R)
C.I.
MHL
HDMI 2
HDMI 3
OUTPUT
3
4
NOTE
• To detach the stand, perform the steps in reverse order.
• Refer “Building the Work Table” in carton box to assemble the TV.
CAUTION
• Do not attach or detach the stand without holding it.
Doing so can cause the stand to fall, resulting in serious personal injuries as well as damage to the stand.
• The illustrations used throughout this manual are based on LC-60LE660X.
Polystyrene foam
