Sharp LC-49CFE4041E, Руководство по обслуживанию

Страница: 41 / 64

41
5.2 ADC ADJUST & WHITE BALANCE AUTO ADJUST
It’s for adjusting the YPBPR and PC color. Press key “right” or “ok”
to enter the subpage.
Auto Adjust:
Start to auto color to get ADC value.
Source: Set source for adjusting
R-Gain:
Display current ADC R value.
G-Gain: Display current ADC G value.
B-Gain:
Display current ADC B value.
R-Offset: Display current ADC R offset value.
G-Offset:
Display current ADC G offset value.
B-Offset: Display current ADC B offset value
Reset:
Reset to default values.
5.3 PICTURE
Source:
Choose source
Picture Mode:
Change picture mode parameters
Picture Curve:
Picture mode parameter curve.
WB Adjust:
White Balance parameter setting
Overscan:
Overscan setting
PQ Advanced:
For PQ Adjustment.
Gamma:
Preset serveral Gamma Curves, for PQ debug.
DLC:
Preset serveral Curves, for PQ debug.
HDMI RGB Range:
Change Limit range or Full Range.
Picture 2 ADC Setting
Picture 3 Picture Setting