46
To watch an HDMI equipment image, select
“INPUT1”, “INPUT2”, “INPUT3” or “INPUT4”
using
TV/VIDEO
on the remote control unit or
on the TV.
1
Press
MENU
and the MENU screen displays.
2
Press
b/c/d
to select “Option”.
4
Press
a
/
b
to select “HDMI auto view”, and
then press
ENTER.
• The HDMI auto view can be selected only when
“INPUT1”, “INPUT2”, “INPUT3” or INPUT4 is
selected.
6
Setup
CH list
Menu
:Back
:Enter
Input label
Input skip
Output volume select
Τ
erminal setting
Option
[Fixed]
[ ]
HDMI auto view
Allow HDMI view mode to change
[Enable]
w
HDMI (High-Defi nition Multimedia Interface)
Auto View
Press
a
/
b
to select the desired item, and
then press
ENTER
.
7
NOTE
• Refer to your external equipment operation manual for the
above settings.
• When connecting a DVI-HDMI conversion adaptor/cable to
the HDMI terminal, the image may not come in clearly.
Co
nnecting an HDMI output device
Settings when using external devices
HDMI terminals can carry audio and visual signals to the TV with an HDMI certifi ed cable. When you want to output
the audio and picture from an HDMI output device on the TV, select “INPUT1”, “INPUT2”, “INPUT3” or “INPUT4”
by switching the input source.
HDMI output device
Selectable items
Description
Enable/Disable
Set whether or not to use WIDE
MODE based on signal recognition,
including an HDMI signal.
Settings when using HDMI output devices
HDMI cable
(commercially available)
Press
c/d
to select “Setup”.
3
Press
a
/
b
to select “Terminal setting”, and
then press
ENTER
.
5
Audio select for connecting HDMI
When connecting HDMI to the INPUT4 terminal, and
inputting analogue audio signals from the INPUT4
(AUDIO) terminal.
Go to “Menu”
s
“Setup”
s
“Option”
s
“Terminal
setting”
s
“PC input”
s
“Audio select”.
Selected items
Description
HDMI (Digital)
When connecting devices with HDMI
cable to the INPUT4 terminal.
HDMI + Audio
input
When connecting devices with HDMI
cable to the INPUT4 terminal and
inputting analogue audio signals from
the INPUT4 (AUDIO) terminal.
NOTE
• You must set this to “HDMI+Analogue” when connecting
devices with an HDMI-certifi ed cable to the INPUT4
terminal. If “HDMI (Digital)” is set, there will be no sound
output.
40LX710H_en.indd 46
40LX710H_en.indd 46
2010/04/15 16:12:34
2010/04/15 16:12:34