Sharp LC-39LE352E-BK (B), Руководство по эксплуатации

Страница: 11 / 42

English - 10 -
Viewing the Connections
NOTE: When connecting a device via the Side AV input, you must use the supplied connection cables to enable connection.
See the illustrations above. | YPbPr can be used only when you connect a device that has a YPbPr output through the PC input
with YPbPr to PC cable (YPbPr to PC cable is not supplied). When the connection is made, switch to YPbPr source. To enable
PC audio, you will need to use PC/YPBPR AUDIO CONNECTION WHITE & RED inputs. | If an external device is connected
via the SCART socket, the TV will automatically switch to AV mode.| When receiving DTV channels (Mpeg4 H.264) or while
in Media Browser mode, output will not be available via the scart socket. | When using the wall mounting kit
(available from
third party in the market), we recommend that you plug all your cables into the back of the TV before mounting on the wall.
| Insert or remove the CI module only when the TV is SWITCHED OFF. You should refer to the module instruction manual
for details of the settings. Insert the CAM and then the viewing card to the slot that is located in the terminal cover at the rear
side of the TV. The module should be correctly inserted, it is impossible to insert fully if reversed. The CAM or the TV terminal
may be damaged if the CAM is forcefully inserted.
Connector Type Cables Device
Scart
Connection
(back)
VGA
Connection
(back)
SIDE AV
S
IDE
A
V
Max:500mA
PC/YPbPr
Audio
Connection
(side)
Side Audio/Video
Connection Cable
(Supplied)
PC Audio Cable
(Not supplied)
HDMI
Connection
(back)
SPDIF
Connection
(back)
SIDE AV
S
IDE
A
V
Max:500mA
Side AV
Connection
(side)
AV Connection Cable
(supplied)
HEADPHONE
Headphone
Connection
(side)
USB
Connection
(side)
CI
Connection
(side)
CAM
module
A01_[GB]_mb95_4847uk_DVBT_C_S2_DLNA_HBBTV_MMH_39205LED_GOLD19_50249288_basic IB.indd 10 A01_[GB]_mb95_4847uk_DVBT_C_S2_DLNA_HBBTV_MMH_39205LED_GOLD19_50249288_basic IB.indd 10 12.09.2013 15:03:16 12.09.2013 15:03:16