Sharp LC-37HV4H, Руководство по эксплуатации

Страница: 9 / 70

8
AC INPUT
110V–240V
DISPLAY INPUT1 DISPLAY INPUT2
System cable
AVC System (rear view)
AC cord
Display (rear view)
AC cord System cable
(GREY)
Connect the plug firmly
until the hooks on both
sides click. (WHITE)
Connect the plug into
the terminal and secure
it by tightening the
thumb screws.
(GREY) (WHITE)
Setting the System
After putting the Display and the AVC System in place, connect the system cables and AC cords. Use the
cable clamps for bundling the cables.
Preparation
Press down the two
upper hooks to remove
the cover toward you.
Connecting the system cable and the AC cord to the Display
1
2
3
Removing the terminal cover
Connecting the system cable and the AC cord to the AVC System
CAUTION
• TO PREVENT RISK OF ELECTRIC SHOCK, DO NOT TOUCH UN-INSULATED PARTS OF ANY CABLES WITH THE
AC CORD CONNECTED.
Press the two hooks
toward the centre of the
Display and remove the
cover toward you.
LC-37HV4H(E)-a 03.3.10, 1:13 PM 8