e
(Mute)
Using
e
(Mute) on the remote control unit
to mute the
current sound output.
1
2
NOTE
•
Mute will be cancelled after 30 minutes. However,
the TV will not suddenly output loud sound as the
volume level will be set to 0 automatically. Increase
the volume level by pressing
VOL
k
.
Press
e
(Mute)
.
• The sound is silenced.
• “
” is displayed while the mute function is on.
Press
e
(Mute)
again within 30 minutes to
cancel the mute.
• Within 30 minutes, the volume level returns to the
previous setting.
23
Watching TV
SLEEP
Auto power-off at a designated time. This function is
conveniently used when, for instance, going to bed
while watching TV.
Signal
Mode switch
When receiving a
stereo signal
NICAM STEREO , MONO
When receiving a
bilingual signal
NICAM CH A, NICAM CH B, NICAM
CH AB , MONO.
When receiving a
monaural signal
NICAM MONO, MONO
MPX
You can switch between multiple audio modes
when watching a multiple audio or stereo broadcast
programme.
Each time you press
MPX
the mode switches as
follows.
In the NICAM TV broadcasts
In the TV mode of A2 TV broadcasts
Signal
Mode switch
When receiving a
stereo signal
STEREO, MONO
When receiving a
bilingual signal
CH A, CH B, CH AB
When receiving a
monaural signal
MONO
1
2
Press
SLEEP
.
• Remaining time displays when sleep timer has
been set.
Each time you press
SLEEP
, the remaining
time switches as shown below.
0 hr. 30 min.
1 hr. 00 min.
1 hr. 30 min.
2 hr. 30 min.
2 hr. 00 min.
Off
NOTE
• When the time has been set, countdown automatically
starts.
• Five minutes before the preset of time expires, the
remaining time displays each minute.
• Select “Off” by pressing
SLEEP
to cancel the sleep timer.
INFO
While watching DTV you can check the extended
programme information on the screen using
INFO
on
the remote control.
• You can cancel this info by pressing
INFO
again.
GUIDE
Display the channel list.
Press
GUIDE
, and then display the “Channel
List” of DTV and ATV on the screen.
1
2
Press
a
/
b
to select the desired channel, and
then press
ENTER
to switch to the selected
channel.
• When received a encryption program that
cannot be played, it will display the “key” icon.
NOTE
• Only use for DTV.
