Sharp LC-32LE340E, Руководство по обслуживанию

Страница: 17 / 140

LC-32LE340/343
LC-40LE340/343
Operation Manual (Continued)
English - 18 -
Remote Control Handset
Inserting Batteries
Remove the battery cover located on the back of •
the handset by gently pulling backwards from the
indicated part.
Insert two
• AAA/R3 or equivalent type batteries
inside. Insert two AAA/R3 or equivalent type
batteries inside. Observe the correct polarity (+/-)
when inserting batteries and replace the battery
cover.
Note: Remove the battery from remote control
handset when it is not to be used for a long period.
Otherwise it can be damaged due to any leakage of
batteries. Remote range is approximately 7m/23ft.
Switching On/Off
To Switch the TV On
Connect the power cord to the 220-240V AC, 50 •
Hz socket.
Switch the “
• ” button on the rear left hand side
to position “|” so the TV will switch to standby mode.
Then the standby LED lights up.
To switch on the TV from standby mode either:
•
Press the “ • ” button, P+ / P- or a numeric button
on the remote control.
Press the
• -P/CH or P/CH+ touch button on the TV.
The TV will then switch on.
Note:
If you switch on your TV via standby button on
the remote control, the programme/source that you were
watching last will be reselected. The TV will switch on with
the last selected channel number, regardless of the channel
number that you select from the remote control to switch
on the TV.
By either method the TV will switch on.
To Switch the TV Off
Switch the “ • ” button to position 2 as illustrated,
so the TV will switch OFF.
To power down the TV completely, unplug the •
power cord from the mains socket.
Note: When the TV is switched to standby mode,
standby LED can blink to indicate that features such
as Standby Search, Over Air Download or Timer is
active. The LED can also blink when you switch on
the TV from standby mode.
Standby Notifi cations
If the TV switches off while in No Signal mode, the
following on-screen message will be displayed on the
next switch-on:
When the Auto Tv Off timeout is reached, the following
message will be displayed on the screen. Select YES
to shut down the TV. Select NO to cancel. The TV
will switch off as well, if you do not make a selection
on this screen.
If the TV switches off owing to the auto power down
feature, the following on-screen message will be
displayed on the next switch-on:
Digital Teletext (** for UK only)
• Press the “ ” button.
The digital teletext information appears. •
Operate it with the coloured buttons, cursor buttons •
and OK button.
The operation method may differ depending on the
contents of the digital teletext.
Follow the instructions displayed on digital teletext
screen.
When Press “ • OK ” button or similar message appears
on the screen, press the OK button.
When the “
• ” button is pressed, the TV returns to
television broadcasting.
A02_[GB]_MB70_5112UK_DVBT_C_DLNA_HBBTV_MMH_WIFI_32942LED_GOLD11_10075803_50201051.indd 18 18.01.2012 18:24:29
17
LC-32LE340/343
LC-40LE340/343