Sharp LC-32A28L, Руководство по обслуживанию

Страница: 45 / 118

2008-03-14
LC-32A28L, LC-42A48L
45
Supports boundary scan (JTAG)
IC Outline
The MT5305AJMU is 256-pin LQFP
3.3V/1.1V and 1.8V for DDR2
1.2. U404 (NT5TU32M16CG-25C 512MB BGA-84)
Features
• 1.8V ± 0.1V Power Supply Voltage
• Programmable CAS Latency: 3, 4, 5, and 6
• Programmable Additive Latency: 0, 1, 2, 3, and 4
• Write Latency = Read Latency -1
• Programmable Burst Length: 4 and 8
• Programmable Sequential / Interleave Burst
• OCD (Off-Chip Driver Impedance Adjustment)
• ODT (On-Die Termination)
• 4 bit prefetch architecture
• 1k page size for x 4 & x 8, 2k page size for x16
• Data-Strobes: Bidirectional, Differential
• 4 internal memory banks
• Strong and Weak Strength Data-Output Driver
• Auto-Refresh and Self-Refresh
• Power Saving Power-Down modes
• 7.8 µs max. Average Periodic Refresh Interval
• Packages:
60 Ball BGA for x4/x8 components
84 Ball BGA for x16 component
• RoHS Compliance
Description
The 512Mb Double-Data-Rate-2 (DDR2) DRAMs is a highspeed CMOS Double Data Rate 2 SDRAM containing 536,870,912 bits. It is internally
configured as a quad-bank DRAM.
The 512Mb chip is organized as either 32Mbit x 4 I/O x 4 bank, 16Mbit x 8 I/O x 4 bank or 8Mbit x 16 I/O x 4 bank device.
The chip is designed to comply with all key DDR2 DRAM key features: (1) posted CAS with additive latency, (2) write latency = read latency -1, (3) normal
and weak strength dataoutput driver, (4) variable data-output impedance adjustment and (5) an ODT (On-Die Termination) function.
All of the control and address inputs are synchronized with a pair of externally supplied differential clocks. Inputs are latched at the cross point of
differential clocks (CK rising and CK falling). All I/Os are synchronized with a single ended DQS or differential DQS pair in a source synchronous fashion.
A 14 bit address bus for x4 and x8 organised components and a 13 bit address bus for x16 components is used to convey row, column, and bank address
devices.
These devices operate with a single 1.8V+/-0.1V power supply and are available in BGA packages.
An Auto-Refresh and Self-Refresh mode is provided along with various power-saving power-down modes.
1.3. U409 (SII9187ACNU QFN-72)
Introduction
The SiI9187A HDMI Port Processor is the second generation of HDMI devices that support Revision 1.3a of the HDMI Specification. With four HDMI inputs
and a single output, the SiI9187A port processor enhances the functionality of digital TVs using single system on a chip (SoC) solutions with integrated
HDMI 1.3 receivers. The SiI9187A device brings cutting edge innovations like enhanced cable equalization for long cable support, integrated EDID and
CEC functions, and improved ESD protection on all signals connected to
the HDMI connector. The port processor is a fully compliant HDMI device that provides a simple lowcost method of retransmitting digital audio and video to
give consumers a truly all-digital experience. Built-in backward compatibility with DVI 1.0 allows HDMI
systems to connect to any DVI 1.0 source.
This device provides additional integrated features, including standby power modes and a built in regulator, which lowers system cost and optimizes board
design and layout.