11
US
Preparation
Batteries for Remote Control
If the remote control fails to operate the display, replace the batteries in the remote control.
1
Open the battery
compartment cover.
2
Load the supplied AA
batteries.
3
Close the battery
compartment cover.
• Slide the cover in the direction
of the arrow.
• Place the batteries with their
terminals corresponding to the
(+) and (–) indications in the
battery compartment.
• Slide the cover in the direction
of the arrow.
CAUTION
Battery handling precautions
Improper use of the dry batteries can result in leakage of the battery fluid and/or rupture. Be sure to
follow the guidelines outlined below.
• Place the batteries with their terminals according to the (+) and (–) locations.
• Different types of batteries have different characteristics. Do not mix batteries of different types.
• Do not use old and new batteries together. Mixing old and new batteries can shorten the life of new
batteries and/or cause old batteries to leak battery fluid.
• Remove batteries as soon as they are exhausted. Fluid leaking from the batteries can cause a rash. If
fluid has leaked out, wipe it off with a cloth.
Remote control handling precautions
• Do not expose the remote control to excessive shock. Do not place the remote control where it can
get wet or where the humidity is high.
• Do not place the remote control in a location where it is exposed to direct sunlight.
The heat can deform its plastic exterior.
• When the remote sensor window of the display is exposed to direct sunlight or to strong light source,
remote control may prove to be difficult. Change the direction of the light source or of the display or
operate the remote control from a location closer to the remote sensor window.
Note
• The batteries included with the unit may not last as long as new batteries due to aging. Replace them when they fail
to operate the remote control.
• If the remote control is not used for extended periods of time, remove the batteries.
