tV menu
Source labels
You can assign a label to each input source as you
prefer in the label list�
Go to
1�
installation
>
Source labels
Assign a input source and press > to select a
2�
label from label list.
Press
3�
b
on the remote control and check the
result.
assign a channel decoder (For atV)
Decoders that decode channels can be connected to
SCART� You have to assign the TV channel as a channel
to be decoded� Then assign the connection where the
decoder is connected�
Press MENU on the remote control and select
1�
installation
>
Decoder
.
Installation
Decoder
2 ...
3 ...
1 ...
Country
Channel installation
Source labels
Decoder
Current software info
AV reset
Factory reset
Language
TV Menu
Press
2�
≥
to enter the list.
Press
3�
<
or
>
to select the channel to decode.
Press
4�
oK
to select or unselect the channel.
Press
5�
≤
to return to the previous menu.
Press
6�
menu
to exit.
Check your current software version
Press
menu
on the remote control and select
installation
>
Current software info
.
update software (digital broadcasts)
If using (DVB-T) digital broadcasts, your TV automatically
receives software updates� If you receive a message
on-screen prompting you to update your software:
Select
•
accept
(recommended) to update the
software immediately.
Select
•
reject
to exit the update (not
recommended).
Select
•
remind me later
to be reminded to update
the software later.
note
To scan all carriers for upgrade availability, perform the manual
•
upgrade�
The software upgrade may take about 30 minutes, but may
•
take longer (up to 1 hour) depending on the signal status�
Caution
Do not disconnect the AC cord when the software
upgrade is in progress, as this may cause the upgrade
to fail. If problem arises ask a qualified service
personnel before the software upgrade period expires.
aV reset
To reset the Audio and Video to default settings�
Press MENU on the remote control and select
1�
installation
>
aV reset
Press
2�
≥
to select “
Start now
” and press
oK
.
Press
3�
menu
to exit.
Factory reset
When you activate the
Factory reset
, the TV needs to
be reset from First time installation�
Press MENU on the remote control and select
1�
installation
>
Factory reset
Press
2�
≥
to select “
Start now
” and press
oK
.
Press
3�
menu
to exit.
25
